timmyb9 New Member 12 Member For: 10y 1m 25d Posted 27/09/14 07:47 AM Share Posted 27/09/14 07:47 AM Hi all,I am new to the forum so be nice I just bought an 2010 F6 Auto with 45,000 kms on it. Completely stock. I bought from a dealer so I do have 2 months warranty left, it's just that they are a good 45 minutes drive from me, so I thought I'd pose the question here first.Problem is: (probably been happening since I got it, just haven't noticed)When driving around at say 60 or 80 kmh I notice the tacho needle "shaking" when I'm trying to hold a steady speed. Now by shaking Im talking about tiny movement (I really have to stare closely at it to notice) probably moving 50 rpm or thereabouts. Just wandering whether you guys think it could be a miss or just a tacho fault? Giving the car heaps up hills (trying to put load on it) it just powers away with no hesitation at all. Which makes me think its not a miss, but please advice? Does anyone else have this trouble? Thanks in advance,Tim Link to comment Share on other sites More sharing options...
aussie1926 Donating Members 176 Member For: 14y 9m Gender: Male Location: Muswellbrook NSW Posted 30/09/14 01:39 PM Share Posted 30/09/14 01:39 PM Its a auto they tend to shake a bit, imagine at cruise the hyd pressure in the convertor / box loading / unloading why the eng does its thing to maintain speed Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 4m 20d Gender: Male Posted 30/09/14 02:19 PM Share Posted 30/09/14 02:19 PM Could get it data logged to check. Either that or a dying coil. But you'd be having more issues than that Link to comment Share on other sites More sharing options...
timmyb9 New Member 12 Member For: 10y 1m 25d Posted 30/09/14 09:02 PM Author Share Posted 30/09/14 09:02 PM Oh okay excellent. Thanks for the responses guys. Really appreciate it.In terms of getting it data logged, where would I get this done? Obviously its a diagnostic thing, so most mechanics would have one compatible with the f6?Thanks again,Tim Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 4m 20d Gender: Male Posted 30/09/14 11:31 PM Share Posted 30/09/14 11:31 PM An xcal or an obd reader. I've got both but that doesn't help you. Going to a sparky will start to cost though. See if you can find a friendly forum member that can spend a half hour with you. If the rest of the car is working well & there are no codes then I probably wouldn't go looking too hard for something that isn't there right now. Only other thing is potentially a bad earth Link to comment Share on other sites More sharing options...
tronxr6 Donating Members 64 Member For: 10y 7m 12d Gender: Male Location: Langwarrin Posted 01/10/14 03:38 AM Share Posted 01/10/14 03:38 AM G'day Tim I had the same problem with my bf but mine was bouncing about 100 to 200rpm, worse when it was cold.Had Pitlane service and fit a pwr heat exchanger and the problems gone. Troy Link to comment Share on other sites More sharing options...
timmyb9 New Member 12 Member For: 10y 1m 25d Posted 01/10/14 03:51 AM Author Share Posted 01/10/14 03:51 AM G'day TimI had the same problem with my bf but mine was bouncing about 100 to 200rpm, worse when it was cold.Had Pitlane service and fit a pwr heat exchanger and the problems gone. TroyHey Tronxr6,Do you mean a transmission cooler? I'm just unfamiliar with heat exchangers.Thanks again Link to comment Share on other sites More sharing options...
timmyb9 New Member 12 Member For: 10y 1m 25d Posted 01/10/14 04:02 AM Author Share Posted 01/10/14 04:02 AM After googleing I realise what you mean sorry.Are these necessary to fit to stop the water ingress problem I'm reading about on google?Is a 2010 build still suffering problems?Cheers,Tim Link to comment Share on other sites More sharing options...
tronxr6 Donating Members 64 Member For: 10y 7m 12d Gender: Male Location: Langwarrin Posted 02/10/14 01:39 AM Share Posted 02/10/14 01:39 AM G'day Tim,The problem with the heat exchangers they are a bit hit and miss. My car is a 2005 and still had the original one, its a small cost compared to $4500 for a rebuild. I also fitted a earls turbo oil feed line for the same reason. Troy Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 28d Gender: Male Location: Probably above atmospheric pressure Posted 02/10/14 05:23 AM Share Posted 02/10/14 05:23 AM How fast is it shaking? Get a passenger to video it and chuck it up. I was imagining a rapid vibration, not a 100RPM yo-yo like I used to have (and still have if stone cold). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now