Jump to content

Recommended Posts

  • Member
  • Member For: 19y 8m 7d
  • Gender: Male
  • Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998

KPM are proud to announce our exclusive 10,000 Hour rated E85/Ethanol/ Petrol compatible fuel pump. This means approximately 10 years continuous usage on straight E85/Ethanol/Petrol fuel.

Over the years we have seen many E85/Ethanol compatible pumps fail due to the installer and or consumer not realising that they are only rated to limited hours of usage.
These pumps are often classified as E85/Ethanol compatible, however with limited life span. With the abrasive nature of E85/Ethanol we generally see that they are rated at approximately 500 hours of continuous usage.

The KPM300 fuel pump has been manufactured to comply with 10,000 hours of stringent tests and maintains its performance after 1000hrs on abrasive corrosive sulfur fluid.

The KPM300 fuel pump is a direct replacement upgrade to many standard pumps as well as being suited to E85/Ethanol retrofits, high performance in-tank and surge tank systems.

- E85/Ethanol/ Petrol compatible for 10,000 Hours continuous use!
- 300 litres per hour flow capacity
- 38mm universal and compact design
- Extremely quiet operation
- Perfect upgrade replacement on many Australian OEM systems
- Overnight freight Australia Wide

Direct Order

KPMFuelPumpEMAIL_zps2fe03241.jpg

Link to comment
https://www.fordxr6turbo.com/forum/topic/89201-kpm-e85ethanolpetrol-fuel-pump/
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 10m 13d
  • Gender: Male

How do you get the 10,000 hr rating???

Did you guys have one flowing e85 for 417 days non stop???

  On 19/09/2014 at 5:10 AM, KPM Motorsport said:
The KPM300 fuel pump has been manufactured to comply with 10,000 hours of stringent tests and maintains its performance after 1000hrs on abrasive corrosive sulfur fluid

And is it 10,000 or 1000???

Edited by rednose
  • Like 2
  • Member
  • Member For: 19y 8m 7d
  • Gender: Male
  • Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998
  On 19/09/2014 at 6:44 AM, rednose said:

How do you get the 10,000 hr rating???

Did you guys have one flowing e85 for 417 days non stop???

Correct

And is it 10,000 or 1000???

10,000 hours on e85 / 1000 hours on abrasive corrosive sulfur test fluid

  • Like 2
  • Member
  • Member For: 19y 8m 7d
  • Gender: Male
  • Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998
  On 20/09/2014 at 3:23 AM, julesk_1972 said:

Silence with the price question is becoming scary.....

Sorry.

$159 ea

Support Approx

400 rwkw N/A

300 rwkw Forced Induction

  • Like 1
  • All stock bar the k&n panel filter
  • Silver Donating Members
  • Member For: 13y 3m 16d
  • Gender: Male
  • Location: Perth

300rwkw on E85 for forced induction motors...I am the only one that doesn't see the point in that? That's essentially stock car power levels on E85...

Can two of them be used like with your twin 1000hp setup?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'