NZBen Member 50 Member For: 10y 6m 13d Gender: Male Location: Auckland Posted 18/09/14 08:01 AM Share Posted 18/09/14 08:01 AM My stage 1 PW cooler jst arrived from my group buy... yay. I was jst about to cut the cat out, put a new pump and some ID1000 jectors in. I had been told previously that I should be able to get similar fuel consumption providing Im gentle on the gas. However I was talking to someone today who has put the ID1000 in. He said he wouldnt do it again for a daily driver. Round town he said his fuel consumption has gone from 12.5 up to 16l/100. He reckons he would just stick with standard injectors and tune for 280rwkW.I'm currently getting abt 12.8 in start stop traffic. Abt 430/tank. I think 16 would be a deal breaker. Any experience from guys that have put them in before? Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 16d Gender: Male Location: Central Coast Posted 18/09/14 08:08 AM Share Posted 18/09/14 08:08 AM Most people here run them with no issues I usually get around 10l/100km depending on how I drive Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 1m 11d Gender: Male Location: left right out Posted 18/09/14 08:10 AM Share Posted 18/09/14 08:10 AM (edited) I think he needs to modify his throttle usage or re tune.Ive got old school deka 60's and get 12.7 on E10, 12.5 on BP98 making 352 rwkw in a BfID 1000's are fine mate. Edited 18/09/14 08:10 AM by hawlass 1 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 18d Gender: Male Posted 18/09/14 09:47 AM Share Posted 18/09/14 09:47 AM From what I now know from KPM's fuel evening, with a sensible tune through the range economy should be marginally better Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 27d Gender: Male Location: Perth Posted 18/09/14 09:50 AM Share Posted 18/09/14 09:50 AM Bad tune is bad. 1 Link to comment Share on other sites More sharing options...
kyle173 Donating Members 774 Member For: 16y 1m 18d Gender: Male Location: brisbane Posted 18/09/14 09:52 AM Share Posted 18/09/14 09:52 AM on the highway 8 to 9 l/100km around town averaging 17 l/100km I drive with a heavy foot that's with all bolt on, FPR 1200 regulator and fuel tube making just shy of 400RWKW 1 Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 8m 19d Gender: Male Posted 18/09/14 02:02 PM Share Posted 18/09/14 02:02 PM For starters, it is really hard comparing different peoples fuel consumption.I have tried 4 different injectors and I found that the Nizpro 700cc drilled injector seems to give me the best fuel consumption. There are injectors that will use more fuel in normal driving parts of the tune.I have come to the conclusion that although you might see a fuel ratio number on your a/f meter, it does not mean you have that a/f ratio in the combustion chamber.And please someone tell me how your tuner can improve your fuel economy. If he butchers the tune he can make it worse, but not better than the factory tune. Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 16d Gender: Male Location: Central Coast Posted 18/09/14 02:25 PM Share Posted 18/09/14 02:25 PM The factory tune is rich from memory and most basic mods reduce restriction increasing efficency (better power and economy) 1 Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 10m 19d Gender: Male Location: Sydney Posted 18/09/14 02:27 PM Share Posted 18/09/14 02:27 PM lolif you want fuel economy buy a prius 3 Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 8m 19d Gender: Male Posted 18/09/14 03:23 PM Share Posted 18/09/14 03:23 PM The factory tune is rich from memoryYou are getting confused. When it is said the factory tune is rich, it is talking about high load open loop parts of the tuning map.In the closed loop sedate driving parts of the tune the engine will run at stoich and even if the calibration is slightly off it will trim to stoich. So it will never be rich cause it runs at stoich in closed loop operation.So please someone tell me how their tuner improved their fuel economy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now