ratter Member 6,793 Member For: 18y 5m 25d Gender: Male Location: @ my laptop Posted 19/09/14 11:56 AM Share Posted 19/09/14 11:56 AM have not done a 76 but the 82 needs a new bracket and have not had one supplied that I would use with out fixing it 1 Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 10d Gender: Male Location: Mackay QLD Posted 20/09/14 01:57 AM Share Posted 20/09/14 01:57 AM You dont need a new outlet hose as the GTX3576R has the same 2inch size as the factory turbos.On B-Series I was able to keep the factory GT3582R actuator bracket on the GTX3576R.Drilling the tapping the GTX compressor housing isnt that hard. I was able to do it at home with the tools I already had. Although most people wont have taps in their toolbox. I have photos on how to do this if anyones interested.I used a Turbosmart 12psi actuator. Best installed on the bench to get the correct rod length.I went with a .82 rear housing which already had a larger then factory ford wastegate port and flapper but I increased and shaped it even better to control boost.On a B-series the compressor housing will be turned slightly more clockwise then the standard turbo when looking at it from the front when using the factory turbo actuator bracket. My Aftermarket hotside piping had enough play in the pipes/joiners to make up this difference though without buying/modifying parts.As usual, the water and oil lines all matched up perfectly.I just bought a 4inch 45deg silicone bend for my intake ($18 from Ebay) to match my Plazmaman 4inch turboside intake. 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 21d Gender: Male Location: Adelaide Posted 21/09/14 05:30 AM Share Posted 21/09/14 05:30 AM So john in SA just went 10.7@133 on his small GTX Weapon of choice IMHO !! 6 Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 8d Gender: Male Location: Perth Posted 21/09/14 05:49 AM Share Posted 21/09/14 05:49 AM (edited) That's rad. Would definitely be a fantastic turbo for a street car! Edited 21/09/14 05:49 AM by .Stripes. Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 14d Gender: Male Location: A big bridge over a river in South Australia Posted 21/09/14 06:00 AM Share Posted 21/09/14 06:00 AM ^^ It sure would.I'm lucky enough to be catching up with Jon (no 'h' jet..lol) in a few days and he has kindly offered me a drive of his car so I can see/feel first hand the dif between the standard gt turbo like on my g6 and the gtx.Can't wait 3 Link to comment Share on other sites More sharing options...
grimie16 Member 45 Member For: 10y 3m 7d Gender: Male Location: ACT Posted 24/09/14 05:05 AM Share Posted 24/09/14 05:05 AM Pah, What type of driveline stuff did you do for that power? Cheers Link to comment Share on other sites More sharing options...
PAH Donating Members 361 Member For: 15y 10m 2d Gender: Male Posted 26/09/14 08:30 AM Author Share Posted 26/09/14 08:30 AM (edited) Grimie,The car has a heavy duty clutch that was fitted some time ago - in an effort to reduce rollover noise. If my memory is correct, it's rated to 400kw. I hope that's rw kw's. What does Autotech use? Exedy clutches? They are going to know the type of clutch required to handle the power. I might have to replace the clutch again but there's no sign of slipping so far.The car also runs Superpro poly bushes in the diff and the control blades. I started out with the Superpro Comfort bushes but have no upgraded to the heavier duty items. Pat at Wholesale Suspensions sells Superpro bushes and looks after forum members. Autotech uses the red ones - Nolathane perhaps? I asked a Ford mechanic if anything can be done to make the factory rubber bushes last longer (mine chopped out at about 25k's and under warranty). He said "stay off boost". A mate has a non turbo Territory that chopped out the diff bushes somewhere around 60,000 km's. 60,000 km's is more that 25,000km's but it doesn't sound fantastic to me. He fitted poly bushes too - and noticed a slight increase in NVH.Apart from that, the driveline is stock. Anybody - what problems might I encounter?After each mod, I told myself it's enough and I won't have to do anything more. But this time!! Yeah this time I might just make sure I remain satisfied. It's difficult to use what I've got without a 100kmh zone. I stopped on a motorway to make a phone call. Accelerating back into the traffic, the power felt VERY STRONG. PAH Edited 26/09/14 08:35 AM by PAH 2 Link to comment Share on other sites More sharing options...
PAH Donating Members 361 Member For: 15y 10m 2d Gender: Male Posted 27/09/14 12:09 AM Author Share Posted 27/09/14 12:09 AM Spiro's tune is a good one.Around town economy on this tank of fuel has dropped into the 10's (10.9 L/100kms) using my rat-run to get to work at Ryde (Sydney). Admittedly, I worked late last night so drove home after the peak hour and the roads were quiet today - Saturday morning. In heavier traffic, fuel consumption increases into the 12's but I can live with that. Some of the current crop of buzz boxes burn as little as 5 / L 100 and that's better than my ZRX1200. Keeping the XR6 for weekends and wearing out a buzz box sounds like an idea. So what buzz box do I buy? They reckon the Suzuki Alto is the cheapest of the crop. Or . . . . Build a Lotus 7 replica! www.prbaustralia.com.au Another nice weekend car! If fuel costs go through the roof, I'd look at liquid injected LPG. PAH Link to comment Share on other sites More sharing options...
PAH Donating Members 361 Member For: 15y 10m 2d Gender: Male Posted 09/10/14 09:46 AM Author Share Posted 09/10/14 09:46 AM Hi Guys,I drove the car to Coffs and back for the long weekend. 8.4L/100kms. I can live with that - more than happy to be honest!. Thanks Spiro!PAH 6 Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 3m 15d Gender: Male Location: Adelaide Posted 15/10/14 06:29 AM Share Posted 15/10/14 06:29 AM how much torque did you get with ya gtx pah Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now