PAH Donating Members 361 Member For: 15y 10m 4d Gender: Male Posted 15/09/14 09:11 PM Share Posted 15/09/14 09:11 PM Hi Guys,I just had a GTX 3576 turbo and a Process West fitted to my FG XR6 Turbo by Autotech at Granville. They removed the last of the factory exhaust and it now runs an X-Force system from the cat to the rear. I went for the GTX3576 rather than the GTX3582 as I want grunt lower in the rev range.The car is making 360 kw on 98 RON and it feels VERY STRONG. The car is lovely to drive and it's using 12L/100 km's around town - sometimes a little bit better. Many thanks to Spiro at Autotech for all your help and advice. PAH 9 Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3d Gender: Male Location: Brisbane Posted 15/09/14 09:13 PM Share Posted 15/09/14 09:13 PM Nice turbo choice, did you got a dyno sheet to share?I bet it is a tyre shredder :-) Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 19d Gender: Male Location: Central Coast Posted 16/09/14 12:23 AM Share Posted 16/09/14 12:23 AM That's awesome mate Any ideas if your going to go E85 Link to comment Share on other sites More sharing options...
PAH Donating Members 361 Member For: 15y 10m 4d Gender: Male Posted 16/09/14 02:40 AM Author Share Posted 16/09/14 02:40 AM (edited) Hi Guys,Yes Spiro mentioned that the pump he installed can be used with E85. I have ignored the E85 option because none of the servos out my way sell the stuff. Apart from that, with 360kw's I am already driving carefully!! How much tyre smoke do you guys need anyway? ;-) Before this upgrade, I had identified that the poly bushes had degraded (axle tramp again) so Spiro fitted a new set for me. Many thanks to Pat at Wholesale Suspensions for his help too. Spiro picked up a weepy diff seal and looked after me on that issue too. The axle tramp has disappeared with the new Superpro heavy duty bushes. I had been running Superpro Comfort bushes. I have a laminated Dyno Sheet from Spiro - I will ask him if he can email me a soft copy.PAH Edited 16/09/14 02:42 AM by PAH Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 12d Gender: Male Location: Mackay QLD Posted 16/09/14 03:06 AM Share Posted 16/09/14 03:06 AM Nice, did spiro mention how much more was left in the turbo. Can't wait to get my gtx3576r tuned on my BF. Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 19d Gender: Male Location: Central Coast Posted 16/09/14 03:32 AM Share Posted 16/09/14 03:32 AM Yes I'd be very interested to see it on e85I've been considering this turbo as well. I miss the response of the standard turbo.How would you compare the response of the gtx compared with the standard turbo? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 23d Gender: Male Location: Adelaide Posted 16/09/14 04:12 AM Share Posted 16/09/14 04:12 AM GTX76 on e85 tops out at around 410rwkw with 27psi been done a few times now Link to comment Share on other sites More sharing options...
PAH Donating Members 361 Member For: 15y 10m 4d Gender: Male Posted 16/09/14 08:55 AM Author Share Posted 16/09/14 08:55 AM (edited) Hi Guys,Spiro saw 360kw's on the dyno. And as I said to him, I doubt that I have been able to sample all of them in the burbs as I don't ant to be locked up! 1st gear is used with discretion and 2nd gear needs a 110kmh limit to stay on the safe side. I've given it a quick try up to motorway speed limits and it pulls very nicely. It comes on boost early like the factory turbo, pulling strongly in the mid range. Although the old factory turbo was OK in mid range, it ran out of pull above that. The GTX3576 pulls harder mid range and keeps on going. I can see that there's a need for high levels of concentration to avoid smoke screens, warp speeds and detection in these areas. The EFFORTLESS MID RANGE is what I like. Power drop off in the hotter summer months was an irritation with the old cooler. I will be keen to see how well the Process West cooler resists that problem. I wasn't thinking - I'd meant to paint it black before it was installed. If you're thinking of the Process West upgrade, ask Kevin if he can powder coat it for you before delivery ;-)Not too sure how much is left in the turbo. Give Autotech a call. 9897 1378. I am interested in street drivability and I suspect that power figures too much more than the mid to upper 300's might be more suited to Eastern Creek.PAH Edited 16/09/14 09:00 AM by PAH Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 19d Gender: Male Location: Central Coast Posted 16/09/14 10:47 AM Share Posted 16/09/14 10:47 AM Thanks for that manI'm already at 440rwkw on e85 with the billet wheeled f6 turbo but I've been considering dropping down a size as it's a daily.Glad to hear your happy with it mate Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 3m 6d Gender: Male Posted 17/09/14 02:14 AM Share Posted 17/09/14 02:14 AM GTX76 on e85 tops out at around 410rwkw with 27psi been done a few times nowSpiro got 430 out of the GTX76 on Nathans car Jet.Even Spiro was impressed as he didn't think it would make that much.Same Nath that went 10.8 with the stock GT76. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now