Peter_M Member 31 Member For: 14y 1m 2d Posted 14/09/14 07:56 AM Share Posted 14/09/14 07:56 AM Hi Guys,I currently have a 2003 BA XR6 Turbo and has the following mods:- Cold air intake, right handside kit (not battery relocation)- Replaced valve springs- 4 Speed BTR has been built by DTM Auto's in geelong- Monza (ebay) cooler- Hi flow injectors- 3" Dump pipeI had it tuned by Dynomotive in Bayswater and they managed to get 275RWKW with the mentioned mods however my aim was to get 300rwkw.Dynomotive use the HP tuner instead of the SCT handheld device, so I am not sure if that had any impact?What am I missing here to get to the 300rwkw mark?All feedback will be greatly appreciated.Regards,Peter Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/ Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 20y 5m 10d Gender: Male Location: In my house Posted 14/09/14 08:00 AM Share Posted 14/09/14 08:00 AM Id say exhaust mate. I had a BA with similar mods but I had a APS exhaust and pissed in 300rwkw. Im not sure if you need a fuel pump as well. What size injectors are they? Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499220 Share on other sites More sharing options...
ramp rate Member 49 Member For: 10y 10m 21d Gender: Male Location: central coast nsw Posted 14/09/14 08:24 AM Share Posted 14/09/14 08:24 AM like tranny said mate ,exhaust, 100cpi cat ,fuel pump upgade a must.. .ive had bad experience with HP TUNER ,ate an engine fried the ecu ,but each to the own on that one.your almost there on ya supporting mods.once you have the fuel and exhaust side sorted 300 will be a walk in.good luch bud. Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499224 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 25d Gender: Male Location: Perth Posted 14/09/14 08:28 AM Share Posted 14/09/14 08:28 AM How did hp tuners eat your engine and fry the ecu? 1 Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499227 Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 10m 16d Gender: Male Location: South West QLD Posted 14/09/14 08:55 AM Share Posted 14/09/14 08:55 AM It was obviously hungry? 2 Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499232 Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 17y 17d Gender: Male Location: Adelaide Posted 14/09/14 09:08 AM Share Posted 14/09/14 09:08 AM Lol Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499239 Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 9m 29d Gender: Male Location: Zombie Birdhouse Posted 15/09/14 03:42 AM Share Posted 15/09/14 03:42 AM to OP seems to me that there is a restriction in the zorst. or fuel delivery. Like tranny says, I also had an APS turbo back zorst that supported over 300rwkwCat seems to be missing in the list of mods? Also as said squirter type and overall fueling details would help Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499370 Share on other sites More sharing options...
phantom xr6t Talks Cheap, Let's Race Member 596 Member For: 18y 7m 2d Gender: Male Location: Atherton, FNQ Posted 15/09/14 08:09 AM Share Posted 15/09/14 08:09 AM I have the 300 kw you are looking for with the following and a very good tuner CPV up at mackaynizpro drilled injectorsstd exaust with a 5" body and 4 " outlets hi flow catuprated valve springsmonza coolerrapid hotside pipeuprated wastegate actuater Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499439 Share on other sites More sharing options...
Peter_M Member 31 Member For: 14y 1m 2d Posted 15/09/14 08:38 AM Author Share Posted 15/09/14 08:38 AM Ok so just checked the injectors to see what type they are and they are blue and are printed as 0 280 156 123 which I believe are the factory ones? this doesn't make sense to me as when I bought the car the injectors had been done, and I'm not sure how I possible got 275rwkw with std injectors?Injectors aside, apart from the mods listed everything else is stock..In regards to the HP Tuner experience ramp rate, can you elaborate on how the tuner software itself did that? It does make abit of sense because shortly after I got it tuned, my ecu did fry itself... but its been fine ever since. Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499453 Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 17y 17d Gender: Male Location: Adelaide Posted 15/09/14 08:59 AM Share Posted 15/09/14 08:59 AM *** ECU's frying them selves everywhere ***After hp tuners lol ...... Link to comment https://www.fordxr6turbo.com/forum/topic/89176-chasing-300rwkw-ba-xr6-turbo/#findComment-1499459 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now