MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 13y 15d Gender: Male Location: Wollongong Posted 03/09/14 05:05 AM Share Posted 03/09/14 05:05 AM The lemon is at the shop getting the engine and box bolted back together up on a hoist after I shattered the sump mounts trying to tighten it. The mechanic just range me up and said he has it about 5mm from being together but it just gets tight and wont go any further together. Is there any tips or something im missing that could be stoppping them going together? I know the locating pins have a small ridge, would that be the issue? myself aswell as the mechanic are at our whits end. surely it cant be that hard? Box is '04, engine is '04/'05 Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/ Share on other sites More sharing options...
ratter Member 6,793 Member For: 19y 10d Gender: Male Location: @ my laptop Posted 03/09/14 05:19 AM Share Posted 03/09/14 05:19 AM torque convertor not sitting in correctly, trying to force normally ends up with damaged oil pump gear 3 Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496908 Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 13y 15d Gender: Male Location: Wollongong Posted 03/09/14 05:20 AM Author Share Posted 03/09/14 05:20 AM cheers ratter, ill let them know. It seemed the converter was sitting ok! The flywheel is slightly concave, should that be facing outward or inward? Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496910 Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 9m 27d Gender: Male Posted 03/09/14 05:21 AM Share Posted 03/09/14 05:21 AM Try fitting it without the converter! Will eliminate that one. Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496912 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 14d Gender: Male Location: Perth Posted 03/09/14 06:54 AM Share Posted 03/09/14 06:54 AM Engine didn't come out of manual car did it? Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496928 Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 6m 16d Gender: Male Location: Melbourne Posted 03/09/14 07:03 AM Share Posted 03/09/14 07:03 AM Yeah I was thinking along the line of spigot bush Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496931 Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 13y 15d Gender: Male Location: Wollongong Posted 03/09/14 08:02 AM Author Share Posted 03/09/14 08:02 AM ding ding dingboth you two are correct, farken thing. done now, itll be ready tomorrow cheers boys Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496942 Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 6m 16d Gender: Male Location: Melbourne Posted 03/09/14 08:16 AM Share Posted 03/09/14 08:16 AM A lot of hassle over something so simple... At least it's worked out now Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496947 Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 13y 15d Gender: Male Location: Wollongong Posted 03/09/14 11:42 AM Author Share Posted 03/09/14 11:42 AM imagine trying to do it in the driveway, yeh I did. Smashed 3 mounts off the sump where the engine and box bolt together, all because of this stupid bearing I couldn't see! Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496987 Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 4m 9d Gender: Male Location: near brisbane Posted 03/09/14 11:56 AM Share Posted 03/09/14 11:56 AM bugger , that sux . Link to comment https://www.fordxr6turbo.com/forum/topic/89110-any-reason-btr-and-engine-wont-bolt-up-tight/#findComment-1496992 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now