Azid Member 213 Member For: 13y 3m 1d Posted 29/08/14 06:28 AM Share Posted 29/08/14 06:28 AM (edited) Hey guysI've had a slowly getting worse noise coming from engine/under drivers side. It's like a rattling noise that sounds like muffler is shot. Had it looked at and it's not exhaust it's coming more from engine so was thinking maybe manifold gasket. I took the heat shielding off to have a look and noticed one of the 4 bolts that join turbo and manifold seems to be sitting out and guessing it shouldn't. Would this be maybe a cause? I'm still thinking its something else but since it just started to rain on me I had to stop. I posted pic below of the bolt can someone just confirm this isn't normal and any suggestions what issue could be. Ill post video of noise when it stops raining and put pipe work back on Edited 29/08/14 06:29 AM by Azid Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 28d Gender: Male Location: Melbourne Posted 29/08/14 06:35 AM Share Posted 29/08/14 06:35 AM Correct, that is not normal and you will have an exhaust leak, can sound like a ticking noise sometimes as wellYou will definitely need a new gasket and I suggest 4 new bolts as well Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 28d Gender: Male Location: Melbourne Posted 29/08/14 06:35 AM Share Posted 29/08/14 06:35 AM Studs and nuts I mean Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 1m 10d Gender: Male Location: left right out Posted 29/08/14 06:37 AM Share Posted 29/08/14 06:37 AM (edited) Your dead right, that's not the ideal fitment.Tighten it up along with the others holding the turbo to the manifold, and the manifold to the head will need checking too.In a BF, 40nm is the setting for the manifold to head bolts/nut-studs , or FT if you dont have a torque wrench. Edited 29/08/14 06:41 AM by hawlass Link to comment Share on other sites More sharing options...
Azid Member 213 Member For: 13y 3m 1d Posted 29/08/14 07:08 AM Author Share Posted 29/08/14 07:08 AM (edited) Hey thanks guys would that one bolt being loose be enough to leak a lot causing noise? I've got video it doesn't sound as bad as in person though.trim.RzkCIP.MOV Edited 29/08/14 07:14 AM by Azid Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 1m 10d Gender: Male Location: left right out Posted 29/08/14 07:36 AM Share Posted 29/08/14 07:36 AM Yep, classic tractor sound.Tighten them up and she will be all good. Link to comment Share on other sites More sharing options...
Azid Member 213 Member For: 13y 3m 1d Posted 29/08/14 12:09 PM Author Share Posted 29/08/14 12:09 PM Is there an easy way to get to that bolt without taking everything off and out? Although gasket has probably blown out and needs replacing huh? Which is no small job Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 1m 10d Gender: Male Location: left right out Posted 29/08/14 08:35 PM Share Posted 29/08/14 08:35 PM (edited) No easy way unless you pay someone.Just persist with it and you will get there in the end minus some skin on your knuckles. As for gasket, there is none at that point from memory, the metal expands as it heats and seals well.Oh and its a stud and nut , not a bolt. Wind it back in and you will be all good.Just checked and its 55mn for the stud/nut torque but I doubt you can get a torque wrench in there, just as tight as you can with a spanner really. Edited 29/08/14 08:38 PM by hawlass Link to comment Share on other sites More sharing options...
Peppy_t92 Silver Donating Members 748 Member For: 11y 8m 16d Gender: Male Location: Liverpool Posted 29/08/14 08:46 PM Share Posted 29/08/14 08:46 PM All the exhaust/turbo bolts should be checked frequently, as they do come loose. Also get them as right as you can, go for a 10min drive and then put a spanner over all of them, you'll find they tighten even more (wear protection) Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 19y 11m 12d Gender: Male Location: In my house Posted 29/08/14 09:23 PM Share Posted 29/08/14 09:23 PM That one thing I dont miss about my old Turbo. Bloody manifold and turbo bolts coming loose..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now