Penarol007 New Member 3 Member For: 10y 4m 2d Posted 19/08/14 10:28 AM Share Posted 19/08/14 10:28 AM Hi all, first time poster, long time fordforums member. I started this thread before in the fordforums however no assistance or reply posts. Was wondering if someone here in the turbo community can be of assitance.Hi all, looking at upgrading my daily driver (AU 6cyl). Having a BA xr8 as a weekender im not sure if I want to spend more money on it as I have a soft spot for this car and I don’t like to thrash it, hence why I want a BA xr6t to thrash around in (daily and track).I’m looking at buying the BA 4 speed and not the BF 6speed. Basically although the 6speed is the best box going around I hate the idea of it breaking and the repair cost being above 4gs. As opposed to the 4speed that I can just wack in any BA 4speed from the wreckers and get that strengthened while I drive around in the slipping 4 speed.So I need some critique on this build cost and my idea. I guess there is a hidden agenda for everything. Basically I want to wipe the smirk of a certain VE ss owners face at the track.These prices are basic research prices and not exact figures. So please, go nuts, critique away.Also in terms of RWKW and torque at the wheels, although speculative based on the condition of the car. what would the expectations be with this build? Any estimates of 1/4 mile times?CAI: $450.00Replace old coils: $160.00Exhaust Full: $1400.00Oil: $50.00Injectors: $350.00Oil filter: $15.00Fuel pump: $500.00Spark Plugs: $80.00Actuator: $190.00Valve Springs Fitted: $800.00P/WestIntercooler: $1050.00Earl inline oil filter: $150.00Tune: $1000.00Purchase of Car: $8000.00Tyres x2 rear $750.00 All up about 15k Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 22d Gender: Male Location: Perth Posted 19/08/14 10:32 AM Share Posted 19/08/14 10:32 AM Should go close to 300 rwkw, but you forgot to add wastegate porting. Those mods will take you to the limit of the box. 1 Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 25d Gender: Male Location: Brisbane Posted 19/08/14 10:42 AM Share Posted 19/08/14 10:42 AM 6 speed will be fine at 300rwkw, btr will die eventually Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 19/08/14 11:14 AM Share Posted 19/08/14 11:14 AM don't use anything other than genuine coils Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 17d Gender: Male Location: near brisbane Posted 19/08/14 11:51 AM Share Posted 19/08/14 11:51 AM why is that , Ratter ? Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 19/08/14 11:55 AM Share Posted 19/08/14 11:55 AM no other coils last as long as the genuine when the boost is increased 1 Link to comment Share on other sites More sharing options...
Penarol007 New Member 3 Member For: 10y 4m 2d Posted 19/08/14 12:44 PM Author Share Posted 19/08/14 12:44 PM Should go close to 300 rwkw, but you forgot to add wastegate porting. Those mods will take you to the limit of the box.Thanks heaps mate. How much is it for the wastegate porting? Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 18y 11m 27d Gender: Male Location: North West Hot Hell,VIC Posted 19/08/14 09:07 PM Share Posted 19/08/14 09:07 PM It varies from shop to shop. Some just bore a bigger hole while others port the passage behind for better flow and boost control. There are good threads on this in this forum you just need to use the search function. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 26d Posted 20/08/14 05:57 AM Share Posted 20/08/14 05:57 AM 6 speed will be fine at 300rwkw, btr will die eventuallyAgreed with this! You might spend an extra $2k on the car with zf but that auto will hate you with that power and especially at the track. In saying that I had a mate kill a zf with 320rwkw so depends on how you drivedon't use anything other than genuine coilsI think genuine are around $300ish but from what I heard aftermarket just don't cut itIt varies from shop to shop. Some just bore a bigger hole while others port the passage behind for better flow and boost control. There are good threads on this in this forum you just need to use the search function.Looking at about $300ish on the port job with flapper upgrade, but not including labour. Probably $1k removed, port job and refitted. This is imperative to control boost with a bigger exhaust Link to comment Share on other sites More sharing options...
Penarol007 New Member 3 Member For: 10y 4m 2d Posted 20/08/14 10:55 AM Author Share Posted 20/08/14 10:55 AM Thanks heaps Bellato. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now