Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 4m 27d Gender: Male Location: Brisbane Posted 13/09/14 09:12 AM Share Posted 13/09/14 09:12 AM Didn't catch up with him but the car was out and about and holding its own. Interested to hear the feedback when he gets back. Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 16d Gender: Male Location: near brisbane Posted 14/09/14 07:37 AM Author Share Posted 14/09/14 07:37 AM that was the most fun I had for a long time ,the car ran well . at willowbank it ran a 12.807 ,60"2.193. but at the powercruise track it chopped cars that ran 11 seconds ,must havebeen due to that I could hold it at 3500 rpm in first gear and the gun it . still got this big grin on my face ,just loved the comments "that they did not think that it was turbo charged " andthat they were shocked that I past them .lol . absolutely stocked with the out come ,mates fg turbo was just .100 second faster down the drag strip with a 2.001 60" .now I would like tobuild a engine with about 100 rwkw more ,but were do you stop . still had so much fun ,just the atmosphere down there was great . 2 Link to comment Share on other sites More sharing options...
pro346 Member 63 Member For: 12y 8m 3d Posted 15/09/14 06:08 AM Share Posted 15/09/14 06:08 AM what mph did you run? 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 16d Gender: Male Location: near brisbane Posted 15/09/14 10:33 AM Author Share Posted 15/09/14 10:33 AM 112.15 mph or 180.49 k/mh Link to comment Share on other sites More sharing options...
pro346 Member 63 Member For: 12y 8m 3d Posted 16/09/14 10:25 AM Share Posted 16/09/14 10:25 AM Well you picked up 1/2 a second and 6 mph!! just goes to show how poor your original tune was... I still believe your current one wouldnt be purfect though! next time out the drags try n stall car up to see 8-10 ps on the line... that will get your 60ft down and you will probably run a low 12! Good luck! Link to comment Share on other sites More sharing options...
matt036 Donating Members 280 Member For: 14y 11m 7d Gender: Male Posted 16/09/14 10:30 AM Share Posted 16/09/14 10:30 AM 8 - 10 psi off the line will be goodbye tailshaft....... 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 13d Gender: Male Location: Western Sydney Posted 16/09/14 10:53 AM Share Posted 16/09/14 10:53 AM ^^^He's got a built tailshaft already. Link to comment Share on other sites More sharing options...
matt036 Donating Members 280 Member For: 14y 11m 7d Gender: Male Posted 16/09/14 10:56 AM Share Posted 16/09/14 10:56 AM well hes laughin then Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 24d Gender: Male Location: Brisbane Posted 16/09/14 09:17 PM Share Posted 16/09/14 09:17 PM Pretty sure it will spin before he can make 10psi with that converter. Cant make any more than about 4psi in my zf with stock stall without spinning em. That is on the slippery concrete in the garage though and really easing it on. If I just stamp it, spins straight away. Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 16d Gender: Male Location: near brisbane Posted 17/09/14 06:35 AM Author Share Posted 17/09/14 06:35 AM I had the ute stalled up as much as I could (about 2000 rpm ) but that's as high as I could get it .the ute just does not want to go any better of the line . all the 6 runs are consistent 2.260" . with the E BOOST I have to change every time I start the engine over to the 15 psi tune or it is just a 10 psi boost ,and of course the first run I had I forgot to press the button . itstill ran on 10 psi a 13.017 with a 60 "2.277 . so the 15 psi is not that much better at 12.807 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now