Jump to content

Fg 350Rwkw


mattri

Recommended Posts

  • Member
  • Member For: 19y 7m 1d

hey guys

got my car back and tuned with the following mods

thoughts??

2008 FG f6

70kms

HDi GT2 1000hp Intercooler and piping

4 inch Plazmaman Turbo side intake

4 inch xforce turbo back exhaust with hi flow cat

Turbo smart external gate and screamer

80lb Injectors

460l Walbro Fuel pump

SCT Tune

I thinks that's all, made 350rwkw safe

Next will be valve springs and feul system for more power

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 10y 4m 10d
  • Gender: Male
  • Location: Perth

Getting something similar to my FG done in the coming weeks.

Interested to know how the 4" xforce sounds?? as im getting the same thing!

Sounds like a lot of power, enjoy :)

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 12y 8m 27d
  • Gender: Male

The f6 pump is rated higher than standard fg ones though but it would be getting close

Speaking to Simon at Nizpro and he seems to disagree. He said they can normally see low 400's on pump with the stock F6 pump but get the occasional one that plays up and needs to be changed at a lower power figure. Edited by demon1300
  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 19y 7m 1d

Its got 80lb injectors and a 460l walbro in it

I asked for a very safe tune, he said there was alot more in it but with no stock springs and rods he wound it back to 350 and it will be very safe

boost is at 15psi

Edited by mattri
  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 19y 7m 1d

got a call from the tuner yesterday as they had to replace the oil line as it had a leak (warranty at intune) and he said that it was running out of puff up high so we decided to put in a Herrod full intake system (biggest intake avaialble)

This will go in the car today and then re ran on the dyno to ensure its all ok

He said it would make 400 easy but to be safe (stock internals and valve springs for now) he put it back to 350rwkw

Hopefully getting it back saturday so the performance inc cruise sunday

Link to comment
Share on other sites

  • MattyP
  • Cruise Control
  • Member For: 12y 6m 1d
  • Gender: Male
  • Location: Central Coast

hey man

The herrod intake as with any crossover CAI wont actually give that much more power/flow. The crossover pipe itself is the restriction. I had one and I got rid of it for a plaz turbo side. good luck with intune bud

Edit

Wait I dont understand, I thought you had a Plaz turbo side so why did you go a herrod intake??

Edited by MattyP
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'