discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 6m 9d Gender: Male Location: Probably above atmospheric pressure Posted 23/09/14 11:06 AM Share Posted 23/09/14 11:06 AM I think if you move the wheel out with longer studs and a spacer or something it accelerates wear of the wheel bearings due to increased load, like extra torque load being applied during corners because the wheel is further out from the "fulcrum" point (the axle). Not sure how much you can get away with before it is noticeable though and it would depend on the offset/width of the rim as to how much extra torque it would produce.Pretty sure that's it anyway. Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501140 Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 13y 2m 20d Gender: Male Location: Perth Posted 23/09/14 01:34 PM Share Posted 23/09/14 01:34 PM ^Not to mention it's illegal! And in this case I actually see a vapid reason for it being so. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501164 Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 18y 5m 5d Gender: Male Location: Macksville NSW. Posted 23/09/14 02:02 PM Share Posted 23/09/14 02:02 PM Yeah....sanity prevails guys.....road use maybe but not when its gonna' end up with a semi slick tyre on it.....Different wheels here we come.....want to keep factory alloys on it so were now on the hunt for some BA wheels.... Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501171 Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 13y 2m 20d Gender: Male Location: Perth Posted 23/09/14 02:11 PM Share Posted 23/09/14 02:11 PM (edited) A wise decision mate. Happy wheel hunting! Edited 23/09/14 02:11 PM by .Stripes. Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501172 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 6m 9d Gender: Male Location: Probably above atmospheric pressure Posted 23/09/14 02:11 PM Share Posted 23/09/14 02:11 PM Oh yeah and I always forget to mention illegal so potentially no insurance in a crash.Good luck with the search! I've seen the BA 18" XR rims on plain XT Falcons and on XR8's with PBR brakes...might be worth offering to buy them off a random guy if you can't find any for sale off car. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501173 Share on other sites More sharing options...
DW260 Member 18 Member For: 20y 5m 22d Location: Nowra Posted 26/09/14 10:34 AM Share Posted 26/09/14 10:34 AM If you're too fussed on size, all FPV 19" rims fit. You could always throw on a set of rims off a FPV GS. They're factory and I'm pretty sure they were the standard rim on the BF GTP. I've seen them sell for about $1500. Usually have some usable rubber on them for that price too. Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1501931 Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 18y 5m 5d Gender: Male Location: Macksville NSW. Posted 04/01/15 12:46 PM Share Posted 04/01/15 12:46 PM Ive bought 8 BA alloys that have small buckles, gutter rash on them......Im going to get them all straightened out and have four polished up to use as road wheels while the other four will be just painted silver for track use.Not real cheap at 250 odd bucks a wheel to get em' cleaned up....ugh Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1521271 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 6m 9d Gender: Male Location: Probably above atmospheric pressure Posted 04/01/15 01:06 PM Share Posted 04/01/15 01:06 PM You'll have quite a collection though and at least no chance of getting the white worm effect under the clear I've seen on so many FPV rims (mine included). At least I assume the XR8 18's don't have the same hard corner between the outer face and the inside faces. Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1521278 Share on other sites More sharing options...
nezbang New Member 13 Member For: 14y 7m 19d Posted 16/01/15 01:18 PM Share Posted 16/01/15 01:18 PM BA xr8 wheels for a 18in to fit...this could be handy for track work... Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1524354 Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 18y 5m 5d Gender: Male Location: Macksville NSW. Posted 18/01/15 10:53 AM Share Posted 18/01/15 10:53 AM yep.....got 11 rims now.....spun em'up and only two are really crook......so Im getting 4 redone really nice for road use and the others will be for track work. Link to comment https://www.fordxr6turbo.com/forum/topic/88839-f6-4-pot-to-6/page/3/#findComment-1524643 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now