gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 3d Posted 26/03/16 07:55 AM Author Share Posted 26/03/16 07:55 AM Fitted the radiator today. Dang it's a tight squeeze. Seems good so far though. Runs noticeably cooler on the temp gauge. Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 23d Gender: Male Location: Western Sydney Posted 26/03/16 08:42 AM Share Posted 26/03/16 08:42 AM Good fun fitting them when there's fark all room ay. Keep an eye on stray current, it's the main cause of alloy radiators blowing out at the end tanks welds, commonly the passenger side. Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 3d Posted 26/03/16 10:19 AM Author Share Posted 26/03/16 10:19 AM Stray current? And yes with a 90mm cooler and trying to cut as little of the reo as possible doesn't give much room for the AC condenser. To fit a 100mm cooler would be horrid Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 3d Posted 26/03/16 11:34 AM Author Share Posted 26/03/16 11:34 AM Very interesting. Have not heard of that before. Never ran a full alloy radiator till now. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 26/03/16 11:43 AM Share Posted 26/03/16 11:43 AM Stray current ?? Oh dear.... Best google it. Produces holes faster than you can order a new radiator. Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 21d Gender: Male Location: Rockhampton Qld Posted 26/03/16 12:06 PM Share Posted 26/03/16 12:06 PM Stray currants are bad for any cooling system 5 Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 3d Posted 09/04/16 03:33 PM Author Share Posted 09/04/16 03:33 PM What type of spark plug gap do you need for 25psi? Swapped mine out yesty as it was breaking down, but the problem is now worse. Fitted genuine coils and genuine plugs Gapped to 0.8. Previously was running the same gap on old plugs. Any other suggestions? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,055 Member For: 16y 8m 14d Gender: Male Location: Melbourne Posted 09/04/16 04:13 PM Share Posted 09/04/16 04:13 PM .8 should be plenty small for that much boost... try .7? Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 29d Gender: Male Location: Central Queensland Posted 09/04/16 09:17 PM Share Posted 09/04/16 09:17 PM 0.6mm is what I run. Any wider and the spark was getting blown out.... 1 Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 11y 2m 24d Posted 09/04/16 10:40 PM Share Posted 09/04/16 10:40 PM Your getting spark blowout with anymore then .6 gap with your coil and cdi setup HI PSI? That's pretty sh*t then should be able to open them plugs to .8 easy. Gaz just gap then to .6 with the stock coils. Wouldn't want to go much less then that though. It's on e85 plus the restriction from the turbo with that much boost I'm surprised the .8 gap was allright before. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now