old_mate Member 767 Member For: 18y 9m 28d Gender: Male Location: Brisbane Posted 05/08/14 01:16 PM Share Posted 05/08/14 01:16 PM (edited) Hardy's at Eagle Farm have been replacing CV's with Uni's but Hardy's at Darra have got a trick CV setup on the go.I have heard the Darra ones are quite a bit less prone to vibrations.Someone with more knowledge might be able to explain why a CV might be better - I thought it had something to do with pinion angles being a bit too big in these things for a uni to work as intended (both strength and NVH) however I was pretty blind last time someone was talking to me about this so it could all be fabrication. Edited 05/08/14 01:18 PM by old_mate 2 Link to comment Share on other sites More sharing options...
XRSEXT Member 235 Member For: 12y 4m 13d Gender: Male Posted 10/08/14 10:45 PM Share Posted 10/08/14 10:45 PM try Gibson mate they are only like $1500 2 Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 4m 5d Gender: Male Location: townsville Posted 17/08/14 02:49 AM Share Posted 17/08/14 02:49 AM Im chasing a shaft in townsville , my mates chasing one up for me cause hardie quoted me $2500, I was thinking that's a bit to much I was thinking they around the 1200-1700 fitted but ill just have to see , cars only got 300rwkw but its running nizpro stage 2 zf with bittet intermeidate and 275mt ets going for a 11.9 or lower with stock converter , its all just in prep for the new turbo and possible rebuild with all the good stuff , still unsure on what turbo to run Link to comment Share on other sites More sharing options...
sct911 Member 848 Member For: 12y 1m 5d Gender: Male Posted 17/08/14 03:06 AM Share Posted 17/08/14 03:06 AM (edited) vevapower has run a 9 second pass on a retubed tailshaft from propeller shaft services in Bankstown, only around $500. I dont think many people on here are even close to running 9 second passes.I know half a dozen people that have had their tailshafts done there, not one has failed, $1500 on a tailshaft is a waste of money IMHOI will be getting my tailshaft retubed at propeller soon Edited 17/08/14 03:07 AM by sct911 1 Link to comment Share on other sites More sharing options...
10SECN Member 516 Member For: 11y 7m 9d Gender: Male Location: west hoxton Posted 19/08/14 03:00 AM Share Posted 19/08/14 03:00 AM vevapower has run a 9 second pass on a retubed tailshaft from propeller shaft services in Bankstown, only around $500. I dont think many people on here are even close to running 9 second passes. I know half a dozen people that have had their tailshafts done there, not one has failed, $1500 on a tailshaft is a waste of money IMHO I will be getting my tailshaft retubed at propeller soon got the same in mine ..... no need for 1000hp shaft if u are never gonna have 1000hp Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 13d Gender: Male Location: near brisbane Posted 19/08/14 06:36 AM Author Share Posted 19/08/14 06:36 AM I got the shaft made and its great .for $750 ,of farrows at nambour great work and cheap ,we ended up fitting two washers under the centre bearing and it got rid off the tail shaft vibration . its all good now 1 Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 4m 24d Gender: Male Location: Brisbane Posted 19/08/14 06:37 AM Share Posted 19/08/14 06:37 AM He give you a power rating? Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 13d Gender: Male Location: near brisbane Posted 19/08/14 07:16 AM Author Share Posted 19/08/14 07:16 AM easily would handle 600 hp he said Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 4m 24d Gender: Male Location: Brisbane Posted 19/08/14 07:18 AM Share Posted 19/08/14 07:18 AM That reasonable. 1 Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 9m 28d Gender: Male Location: Brisbane Posted 19/08/14 11:48 AM Share Posted 19/08/14 11:48 AM wow so many options. Hardy Spicer at Darra quoted 2k for a full new build with the upgraded rear CV and bigger center bearing; 480 ex GST to retube my shaft.10SECN so your shaft is retubed but stock center bearing and rear CV? I am only looking to end up around 600rwhp and will bolt on some sticky tyres once or twice to run that 10 second / 130mph pass - don't want to overkill as you said before but then again don't want to do it twice because it broke Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now