Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 29/06/14 12:13 PM Author Share Posted 29/06/14 12:13 PM yeah 0.8 for when I put the capa chip in but I haven't sorted this problem out, I pulled the front bar out check all the intercooler lines nothing I notice this sensor had to lines going into it just near the throttle body it hanging there under the intake plenum it has a vacume line from the plenum or throttle and a metal line that wont lock in properly that I think comes from the fuel tank im not sure does anyone know what that is?im guessing map sensor but I have no clue that could be a problem? Link to comment Share on other sites More sharing options...
Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 29/06/14 12:15 PM Author Share Posted 29/06/14 12:15 PM or do you guys still think genuine coil packs I don't want to spend more money on coil packs and its not it, im only thinking that because I pulled non genuine ones out (vdo) and was misfiring till now and then I put a different non genuine coil pack (osa) still exactly the same . Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 8d Gender: Male Location: Perth Posted 29/06/14 12:35 PM Share Posted 29/06/14 12:35 PM Pics of sensor? Sounds like the purge solenoid. Link to comment Share on other sites More sharing options...
Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 29/06/14 12:59 PM Author Share Posted 29/06/14 12:59 PM (edited) I took a heap of photos that's the best I can get and some reason it uploads upsidedown Edited 29/06/14 01:00 PM by Brad 'Rangy' Rangott Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 8d Gender: Male Location: Perth Posted 29/06/14 01:05 PM Share Posted 29/06/14 01:05 PM That's the purge solenoid line. If its disconnected from the manifold side air will be entering the manifold post throttle body and will give you issues Link to comment Share on other sites More sharing options...
Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 29/06/14 08:36 PM Author Share Posted 29/06/14 08:36 PM hopefully that's it ill post it up if that's the issue Link to comment Share on other sites More sharing options...
Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 11/07/14 10:34 AM Author Share Posted 11/07/14 10:34 AM I took the car to ford dealer and they found a error code saying cam shaft sensor is out it was advanced 9* when it wasn't and they reckon it was the sensors .1300 later car was good and next day guess what missfiring faaaaarrk ill post when I find out what is going on with this big mystery Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 8d Gender: Male Location: Perth Posted 11/07/14 10:42 AM Share Posted 11/07/14 10:42 AM Cam timing has probably jumped 1 Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 14y 12d Posted 11/07/14 12:01 PM Share Posted 11/07/14 12:01 PM What the hell did they do for $1300 ?Yeah possible has jumped a tooth or two as Ralph said 1 Link to comment Share on other sites More sharing options...
Brad 'Rangy' Rangott Member 14 Member For: 10y 7m 8d Gender: Male Posted 03/08/14 11:03 AM Author Share Posted 03/08/14 11:03 AM alrighty finally solve it was fouled cam sensors from previous owner not changing oil enough the timing was out as well but reckons it didn't jump a tooth also another problem was sh*t fuel from batemans bay shell vpower 98 this is the second time I had problem with there fuel my Nissan gtr had problems from there fuel when I last went on holidays up there, ive drained the fuel and put my home town fuel back in it with some octone booster and cleaner no more misfire , So in final point F@#K!!!! shell in batemans bay do not fuel up your car there my guess its not 98 octane there or crappy fuel. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now