arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 21d Gender: Male Location: Perth Posted 10/07/14 02:00 PM Share Posted 10/07/14 02:00 PM Bar and plate will look similar inside and out, just reversed. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 24d Gender: Male Location: Probably above atmospheric pressure Posted 10/07/14 02:31 PM Share Posted 10/07/14 02:31 PM This thread is exposing my fundamental lack of understanding of intercooler construction methods. Always imagined bar and plate must have actual solid bars inside. Makes sense to see it's the same fins, just at right angles on each layer.Guess I'll go google tube and fin. Link to comment Share on other sites More sharing options...
Vrdesign Member 42 Member For: 10y 10m 19d Posted 10/07/14 11:26 PM Author Share Posted 10/07/14 11:26 PM HDI X01 Bar and plate Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 8m 23d Gender: Male Location: Frankston, 3199 Posted 11/07/14 03:40 AM Share Posted 11/07/14 03:40 AM Interior pic of my PW stepped cooler 1 Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 10d Gender: Male Location: A big bridge over a river in South Australia Posted 11/07/14 04:10 AM Share Posted 11/07/14 04:10 AM ^^ I'm sure the OP will appreciate you going to the extremes of taking the pipe off, crawling inside, replacing the pipe only to realise that you forgot the camera so take the pipe off again, getting out to get the camera, crawling back inside, replace the pipe again and taking a photo but next time.........................turn the flash on Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 21d Gender: Male Location: Perth Posted 11/07/14 04:18 AM Share Posted 11/07/14 04:18 AM Interior pic of my PW stepped coolerIsnt that a pic of the inside of your head. Looks empty to me. 4 Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 7d Gender: Male Posted 11/07/14 04:31 AM Share Posted 11/07/14 04:31 AM (edited) Edited 11/07/14 04:32 AM by Kosij 1 Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 13d Gender: Male Location: Central Coast Posted 11/07/14 04:37 AM Share Posted 11/07/14 04:37 AM That makes sense kosij Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 25d Gender: Male Location: Perth Posted 11/07/14 04:44 AM Share Posted 11/07/14 04:44 AM Drawn by somebody that prefers tube and fin clearlyLOL at the turbulence caused by the solid spaces between the cores being an issue with bar and plate but magically non existence on the tube and fin that also has solid spacing between the cores.biased point of view is biased. 3 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 21d Gender: Male Location: Perth Posted 11/07/14 04:46 AM Share Posted 11/07/14 04:46 AM True, tube and fin probably flows better, but bar and plate is thicker and stronger. A stone may hole a tube and fin, but would have to be a big rock to hole a bar and plate.For street I like bar and plate. Just cram in the biggest cooler you can. We talked about this in the other post. Coolers are like cocks, biggest rules. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now