genuine honest person Member 2,769 Member For: 11y 25d Gender: Male Location: near brisbane Posted 26/04/15 09:53 AM Share Posted 26/04/15 09:53 AM lol ,bizkets . have messaged the guy yesterday ,he messaged me today and was ok about it to help me out . so I will see what happens next .just got the sump undone ,small flakes of aluminium fillings are found in the bottom of the sump . also some grit ,not a lot . still think that the rollers are the week link in these engines Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 3m 1d Gender: Male Location: Melbourne Posted 26/04/15 11:13 AM Share Posted 26/04/15 11:13 AM Sounds like the donor car rolled... And motor still running on its side or roofA motor with 6k should look brand spanking insideDid you pay the guy through paypal ? 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 25d Gender: Male Location: near brisbane Posted 26/04/15 11:43 AM Share Posted 26/04/15 11:43 AM (edited) the engine is clean inside , only black oil but all the alloy is clean . think that when the guy tested the engine if it was a runner he sucked in all the dirt that would have been in the air intake as I have found all bits of plastic that must have Brocken off in the pipes . I deposited the money directly into his account as he had no paypall. just not happy why the carbon on the pistons has flacked off on some spots ? Edited 26/04/15 11:45 AM by genuine honest person Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 23d Gender: Male Location: Adelaide Posted 26/04/15 11:55 AM Share Posted 26/04/15 11:55 AM Ummm I really take it your not fluent in working on engine's hey This is normal for a rich-ish engine or low octane used fuel engine 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 30d Gender: Male Location: Perth Posted 26/04/15 12:07 PM Share Posted 26/04/15 12:07 PM If it's a legit 6000km old engine and hasn't had it's first oil change it all sounds pretty normal to me. 1 Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 3m 1d Gender: Male Location: Melbourne Posted 26/04/15 12:18 PM Share Posted 26/04/15 12:18 PM We need pics! Have you pulled any big end caps or main caps off yet? Or a Compression test before the head came off ? 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 25d Gender: Male Location: near brisbane Posted 26/04/15 12:20 PM Share Posted 26/04/15 12:20 PM what about the score marks up and down ? my neighbour is a mechanic and he was concerned about it .if I was a mechanic my self I would not ask these questions ,I am not and that is why I ask . ps the guy that sold the engine to me said to assemble the engine again and send it back to him ,if it is all I have said and same as the pic I have send to him he will refund the money back to me . wow I am amazed . still waiting for the engine builder to arrive this week to look at the engine Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 25d Gender: Male Location: near brisbane Posted 26/04/15 12:21 PM Share Posted 26/04/15 12:21 PM (edited) there was no starter motor or flex plate ,so I was unable to do a comp test .pictures are to big to up load ,will have to try tomorrow for a friend to show me how to up load them Edited 26/04/15 12:22 PM by genuine honest person Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 3m 1d Gender: Male Location: Melbourne Posted 26/04/15 12:27 PM Share Posted 26/04/15 12:27 PM Oh rightio! Understand the Comp test then... Sounds like your winding your self up a bit and all our opinions (myself included) can send your head all over the shopJust wait until the engine builder with a good set of eyes and good engine knowledge has a look at it Don't stress to much your doing a full rebuild anyways 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 25d Gender: Male Location: near brisbane Posted 26/04/15 12:36 PM Share Posted 26/04/15 12:36 PM lol ,its just my righting that makes me sound upset or cranky . I am German and not the best at getting my point across . look I like everyone's input ,and I know that I no not much about engines or how they are suppose to look inside after 6000 klm .just the rollers look scored to me and the bores as well . I had the sump of on my ba engine and there were no score makes in the bores and it has over 100.000 klm on it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now