f-wolf Member 897 Member For: 17y 7m 1d Gender: Male Location: ACT Posted 13/02/15 02:56 AM Share Posted 13/02/15 02:56 AM Re " I haven't fitted an oil cooler, car is stock. Does it come with one stock? " Your Car's Engine Oil-Cooler System/ Unit is between the Oil Filter and Engine Block if I am not wrong. Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 27d Gender: Male Location: WA, Perth Posted 13/02/15 02:46 PM Share Posted 13/02/15 02:46 PM I am in Perth and I know that during the hotter days like this recent week, the oil temp sits at 85 degrees. OR so Torque says so with that equation.do you really need an accurate reading? your dashboard does not provide an accurate reading.It provides a reference so you know when your car is hot or cold.I use that equation and the figures that are displayed on the screen are for reference purposes only for me.If the car gets hot, then I know it and I can do something about it.Is there any specific reason for having accurate readings? Link to comment Share on other sites More sharing options...
browned New Member 23 Member For: 10y 3m 17d Gender: Male Location: Hamilton, New Zealand Posted 15/02/15 08:35 PM Share Posted 15/02/15 08:35 PM Some readings are good but accurate is better don't you think?I am wondering about Torque, getting caution icy audio messages on a 20 degree morning is a bit odd. But then again I was driving on the thermal explorer highway. Link to comment Share on other sites More sharing options...
Racerx Member 111 Member For: 16y 1m 24d Gender: Male Location: Perth Posted 18/02/15 12:25 PM Share Posted 18/02/15 12:25 PM Thanks guys,for all the effort in figuring out the formula for the EOT, works great. Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 3m 21d Gender: Male Location: Melbourne Posted 19/02/15 04:27 AM Share Posted 19/02/15 04:27 AM Thinking of getting the ELM327 but not sure if I could get the WiFi one or the Bluetooth one. I already run a handsfree kit over Bluetooth in my BA - so was wondering if it will have interference issues if I also try to run the Bluetooth version of the ELM327 - especially on the same Android smartphone. Anyone have any experience with running Bluetooth handsfree kits whilst using Torque with the Bluetooth version of the ELM327? Thanks Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 3d Gender: Male Location: Perth Posted 19/02/15 04:34 AM Share Posted 19/02/15 04:34 AM I run my N5 bluetooth through my Alpine IDE-178 (integral Parrott BT) and ELM 327 simultaneously with no Issue. Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 3m 21d Gender: Male Location: Melbourne Posted 19/02/15 04:39 AM Share Posted 19/02/15 04:39 AM Thanks Rukey wot you doin not at work oh hold on Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 3d Gender: Male Location: Perth Posted 19/02/15 04:46 AM Share Posted 19/02/15 04:46 AM ....? I am at work.... Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 27d Gender: Male Location: WA, Perth Posted 19/02/15 04:52 AM Share Posted 19/02/15 04:52 AM I got the Bluetooth of my phone connected to the ford ICC Bluetooth for phone calls.I got the phone connected to the Bluetooth OBD link MX. (http://www.scantool.net/obdlink-mx.html)I also got the vivosmart watch connected via Bluetooth without issues.I think the limit is 4/5 devices because of the stack overflow. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 3d Gender: Male Location: Perth Posted 19/02/15 05:00 AM Share Posted 19/02/15 05:00 AM Gaz, I use an app called Bluetooth auto connect to set priority of connections and limit services by devices. Helps stop the phone confusing the ELM for an Audio device. Also allows you to auto launch an APP when BT connects. Very handy 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now