genuine honest person Member 2,769 Member For: 10y 10m 21d Gender: Male Location: near brisbane Posted 05/06/16 12:15 PM Author Share Posted 05/06/16 12:15 PM What abot stainless steel .the holes are 2 mm bigger than the original ones on the standard dump. How about aluminium only for tightening up and then they will melt away anyway Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 26d Gender: Male Location: Perth Posted 05/06/16 12:17 PM Share Posted 05/06/16 12:17 PM Use two to align the gasket, nip up two of the other bolts to secure it then remove the spacers? 2 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 21d Gender: Male Location: near brisbane Posted 05/06/16 07:10 PM Author Share Posted 05/06/16 07:10 PM Lol that's how I thought of doing it after I posted when I went to sleep Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 21d Gender: Male Location: near brisbane Posted 06/06/16 09:49 AM Author Share Posted 06/06/16 09:49 AM Will this catch can work ? thanks for any help .does the stainless steel scourer ever need to be changed ? Thought of getting the lid welded on with them inside so I would never be able to change them .could clean it out with turpentine every now and then Link to comment Share on other sites More sharing options...
luke187 Member 297 Member For: 11y 13d Posted 06/06/16 01:01 PM Share Posted 06/06/16 01:01 PM Hahaha stupid phone. 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 18d Gender: Male Location: Western Sydney Posted 07/06/16 12:51 AM Share Posted 07/06/16 12:51 AM So your putting a filter in the 50mm outlet? Could probably go to 30mm or whatever odd size the large breather filters are. Looks like a good setup. Just keep it mounted away from the AC fresh air inlet or you will smell the oil fumes in slow traffic, you don't want that to happen. The fresh air inlet is at the base of the wind screen (in the plastic grill) on the passenger side. 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 21d Gender: Male Location: near brisbane Posted 07/06/16 06:43 AM Author Share Posted 07/06/16 06:43 AM I was originaly going to plump it back into the airbox before the filter but was toled that still does not pass .it would help the fumes entering the cab Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 29d Gender: Male Location: Brisbane Posted 07/06/16 08:37 AM Share Posted 07/06/16 08:37 AM why not just plumb back to the intake manifold like factory and put a check valve on that line to stop your can getting boosted..the idea of a catch can is to trap the atomised oil so you dont suck sh*t in. If your going to vent a catch can to atmo...may aswell just put filters your rocker cover and degrease the bay regularly. its as illegal but alot less complicated.. 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 10m 21d Gender: Male Location: near brisbane Posted 07/06/16 09:28 AM Author Share Posted 07/06/16 09:28 AM why not just plumb back to the intake manifold like factory and put a check valve on that line to stop your can getting boosted..the idea of a catch can is to trap the atomised oil so you dont suck sh*t in. If your going to vent a catch can to atmo...may aswell just put filters your rocker cover and degrease the bay regup back intolarly. its as illegal but alot less complicated.. What is a check valve mate .have sort of an idea .is that ok to plumb back into after the air filter ? Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 18d Gender: Male Location: Western Sydney Posted 07/06/16 10:49 AM Share Posted 07/06/16 10:49 AM Check valve = one way valve. Pretty sure -10 is the biggest speedflow have from memory. Fair comment@barnz but the idea of the catch can when pushing more boost is not just to keep the oil vapour out but mainly to relieve pressure, the cans just keep it reasonably clean compared to a filter setup. Last thing you want is to blow out seals because you didnt have a decent breather setup. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now