arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 3d Gender: Male Location: Perth Posted 23/03/16 12:44 AM Share Posted 23/03/16 12:44 AM Dude. Change to 400 series push on. You will thank me later. 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 7d Gender: Male Location: Perth Posted 23/03/16 12:50 AM Share Posted 23/03/16 12:50 AM Or invest in this- http://www.demon-tweeks.co.uk/motorsport/brake-tools-accessories/koul-tools-braided-hose-assembly-kit Scratch that. It's only suitable for rubber lined braided hose. Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 2d Gender: Male Location: near brisbane Posted 23/03/16 07:57 AM Author Share Posted 23/03/16 07:57 AM On 23/03/2016 at 11:44 AM, arronm said: Dude. Change to 400 series push on. You will thank me later. Bugger to late as it will be here tommorow bought these the other day for my dump pipe . we also got some more work done in the kingswood fitted the lower grill part and the hoses for the catch cans that's what I have spend so far with pirtec .easyer than over the Internet, at least I can go in there and talk in person .not the cheapest way but the best way as I know what I will be getting .he also said if anything needs changing there would be no problem with that at all .still got to get some clamps for the intercooler pipes and more fittings to suit the thermostats that I have ordered fir the wngine and transmission Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 30d Gender: Male Location: Adelaide Posted 24/03/16 08:38 AM Share Posted 24/03/16 08:38 AM Hummmm speedflow fittings or nothing imho 2 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 8m 29d Gender: Male Location: Western Sydney Posted 24/03/16 08:42 AM Share Posted 24/03/16 08:42 AM Mack247 are pretty good. Make sure you dummy fit everything Gunna, I found the proflow fittings don't like being tightened more than once or twice. 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 2d Gender: Male Location: near brisbane Posted 24/03/16 09:34 AM Author Share Posted 24/03/16 09:34 AM Will do ozy On 24/03/2016 at 7:38 PM, JETURBO said: Hummmm speedflow fittings or nothing imho Are they that bad ? Pirtec would not sell sh*t I would have thought as they have a good name Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 2d Gender: Male Location: near brisbane Posted 24/03/16 11:38 PM Author Share Posted 24/03/16 11:38 PM would have thought it would have lined up a lot better .what I will try to do today is to file the face flat as it is not flat at all Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 2m 10d Gender: Male Location: Brisbane Posted 25/03/16 01:22 AM Share Posted 25/03/16 01:22 AM belt sander mate, heaps faster 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 2d Gender: Male Location: near brisbane Posted 25/03/16 02:16 AM Author Share Posted 25/03/16 02:16 AM lot better now .still not perfect but way better than before .could only get a small feeler guage under it so that would not be a problem at all as that will pull up hard when tightened the xforce dump pipe has 10.5 mm holes drilled into there plate but the bolts are only 8 mm .the new fittings I bought have only got a small contact area as they are different than the standard bolts .the new fittings are showing a small gap when pushed to one side ,I will try to make a small shim between the bolt and the dump so that it locates it self centre wise .can I also buy some hardened washers to go onto the new bolt to give me a better surface area to pull up against ? still got to get some ss hose clamps so I can securely mount it to stay in place and then paint it with some exhoust paint black Wrong price lol Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,182 Member For: 16y 9m 20d Gender: Male Location: Melbourne Posted 25/03/16 04:02 AM Share Posted 25/03/16 04:02 AM I was just about to say... haha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now