MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 29d Gender: Male Location: Wollongong Posted 03/06/14 10:04 AM Share Posted 03/06/14 10:04 AM is this a good spot to fit the bov (out of view ) where is the vacuum hose coming from ? I have no idea ,there was no bov fitted on the donor car . please give advise You can put it wherever you ant before the intake mate, a line off the inlet manifold somewhere will be blocked if there was no BOV on it. Just run a simple vac line and you're done 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 03/06/14 11:34 AM Author Share Posted 03/06/14 11:34 AM is it where the auto meter gage is hooked up at the back of the engine ?.I would have to get a t piece to hook it up , it only has one outlet got the engine started today at 7.45 pm ,no problems only got some codes that pooped up u1900 and p0500 vehicle speed A (vss) can someone tell me what they are ? Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y Gender: Male Location: Brisbane Posted 08/06/14 01:10 AM Share Posted 08/06/14 01:10 AM (edited) U1900 is a comms fault on the HIM, I asked over in another thread which HIM you used? http://engine-codes.com/p0500.html Edited 08/06/14 01:13 AM by barnz Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 08/06/14 05:38 AM Author Share Posted 08/06/14 05:38 AM going to have to get a auto electrician to have a look at it ,bugger I used the turbo (HIM) not the v8 one Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 28d Gender: Male Location: Perth Posted 08/06/14 05:45 AM Share Posted 08/06/14 05:45 AM U1900 is a canbus data fault usually caused by the process of flashing the pcm as it stops comes between the pcm and the canbus. Clear it and if it doesn't reappear (without flashing the car in the meantime) ignore it. 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 08/06/14 05:55 AM Author Share Posted 08/06/14 05:55 AM I have reinstalled the standard tune ,but it is still there car is in limp mode ,the dash (gears are flashing )and the traction control is on .my ute never had traction control to start with . might have to take it to someone to turn of the traction control part in the computer . Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 10/06/14 11:43 AM Author Share Posted 10/06/14 11:43 AM boked a auto electrician for this week to come and have a look ,he said it would be easy to fix .hope so .lucky he is a old mate of mine ,he will also re gas the air con same time he is here .today finished fitting the battery box under the alloy tray Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 12/06/14 07:27 AM Author Share Posted 12/06/14 07:27 AM auto electrician gave up ,was unable to fix the fault .would I be better of to take it to ford ,or take it to redcliffe dyno Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y Gender: Male Location: Brisbane Posted 12/06/14 12:36 PM Share Posted 12/06/14 12:36 PM (edited) Did you use the abs module from the wreck or the one in the ute?And did the old box have an OSS output? Edited 12/06/14 12:37 PM by barnz Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 23d Gender: Male Location: near brisbane Posted 12/06/14 08:30 PM Author Share Posted 12/06/14 08:30 PM all the parts from the wreck .what is an oss output ?abs module under centre console ? thanks for the info ,I got everything going but the speedo is not working (still in limp mode )that's probably due to my abs sensors ?going to phone redcliffe dyno today and book it in to get looked at . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now