Banjora07 Member 66 Member For: 13y 2m 15d Posted 31/05/14 04:01 AM Share Posted 31/05/14 04:01 AM hey boys my turbo on my bf typhoon sh*t its self was wonder will a gtx3582r be a direct swap I have a 4 inch intake rear housing flaper mod done and 4 inch dump in know I need new silcone rubber frm turbo to pipe to turbo but anyfing else.thanks Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 8m 1d Gender: Male Location: @ my laptop Posted 31/05/14 04:20 AM Share Posted 31/05/14 04:20 AM you need to make sure your wastegate port is good enough to control boost properly but largely dependent on exhaust system and required boost. You will need the front cover drilled and tapped for a boost reference nipple, you will need a new intake hose, a new outlet hose, a new oil feed hose and we have not seen a supplied actuator that I would use, obviously you will need a tune, but besides that, yes it will bolt on Link to comment Share on other sites More sharing options...
trentlikeshp Member 63 Member For: 13y 2d Posted 31/05/14 04:21 AM Share Posted 31/05/14 04:21 AM yeah mate you can slip the gtx "super core" into your BA/BF turbine housing.. oil/ water ports are all the same.. you'll need either a reducer from outlet of compressor to suit stock hot side or run a whole 2.5 inch hot side..and your 4inch intake will go straight on the gtx 0.7 comp cover..be sure to get it tuned or at least get AFR's checked as they do spool quicker and flow around 10% more than a gt series turbo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now