mdm200 New Member 5 Member For: 10y 11m 28d Gender: Male Posted 20/05/14 02:34 AM Share Posted 20/05/14 02:34 AM Hey all I just had a few quick questions to ask, I recently just purchased an FG and a friend was upgrading his turbo so he sold me his old one (HOLSET), mine is completely stock and I rang up to get a quote on how much it would cost to get this turbo on, the shop I rang said to support the turbo I would need the following mods: .Injectors, fuel pump, I/C, External Gate, air filter, valve springs, full exhaust, oil lines drain back.To me this just seems like a lot to support the turbo, If possible I would be happy at the moment to get just the essentials to bolt the turbo on and have a safe tune with room in the future for expansion, your advice would be greatly appreciated. Sorry if this answer has been asked before I tried to search and had no luck with a similar post. Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/ Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 11m 26d Gender: Male Location: Wollongong Posted 20/05/14 02:40 AM Share Posted 20/05/14 02:40 AM What size turbo, do you have specs? You will find anything larger than stock requires pretty much most of the fuel cooling system to be upgraded Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472643 Share on other sites More sharing options...
mdm200 New Member 5 Member For: 10y 11m 28d Gender: Male Posted 21/05/14 07:09 AM Author Share Posted 21/05/14 07:09 AM Sorry for the late response the turbo is a HOLSET HX45 pro series it is bigger then the stock turbo and has t4 rear housing. Any knowledge on what mods I would need to safely support this turbo on a safe tune? thanks Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472916 Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 9m 27d Posted 21/05/14 08:29 AM Share Posted 21/05/14 08:29 AM The shop u rung is right. The standard turbo is good for 400rwkw with supporting mods. That turbo without knowing much about it will probably be out of its efficiency range at the low boost u want to run anyway. Just to get it to run well to drive u will need a battery relocation, intake, exhaust and a tune. your injectors will then tap out instantly so there next. Then your inlet temps will be supper high so u will need a cooler Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472937 Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 13y 13d Gender: Male Location: Central Coast Posted 21/05/14 08:35 AM Share Posted 21/05/14 08:35 AM Standard turbo good for 400?Tell him he's dreaming 360 is the highest I've heard on the standard turbo on e85 Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472938 Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 9m 12d Gender: Male Location: Adelaide Posted 21/05/14 08:47 AM Share Posted 21/05/14 08:47 AM Maybe a fg f6 1 Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472941 Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 9m 27d Posted 21/05/14 10:42 AM Share Posted 21/05/14 10:42 AM Thought I read f6 but I didn't. Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472961 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 6m 28d Posted 21/05/14 11:37 AM Share Posted 21/05/14 11:37 AM Everything sounds rights except potentially the external gate but not familiar with that turbo at all so might actually require external gate Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1472973 Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 15y 3m 26d Gender: Male Location: Muswellbrook, NSW Posted 21/05/14 02:11 PM Share Posted 21/05/14 02:11 PM What I can find in that turbo its rated to 700hp. that's not huge for having to go new exhaust manifold and all the plumbing.You would need external gate(maybe), new exhaust manifold, dump pipe, airbox, oil and water lines just to fit it. Big cost when there is upto a 900hp t3 turbo that fits without such mods.Waste of time IMHO. Sell it on ebay Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1473006 Share on other sites More sharing options...
fatz_f6_typhoon Member 395 Member For: 12y 4m 17d Gender: Male Location: 2145 nsw Posted 21/05/14 05:47 PM Share Posted 21/05/14 05:47 PM Yeah sell it Link to comment https://www.fordxr6turbo.com/forum/topic/88276-fitting-new-turbo/#findComment-1473018 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now