My Ba Xr6 Turbo 340.2 Rwkw Tuned By Cms

[andrewkerr]

here is my ba xr6 turbo that makes 340.2 rwkw and 1167nm of torque

it was tuned by joe at cms and to say I am happy is a understatement

car destroyed gearbox on dyno and have just had a box built by craigs automatics in chipping norton

mods are

crow cams

crow valve springs

1000cc injectors

upgraded fuel pump

4 inch xforce dump 4 inch 100 cell cat and 3 inch xforce stainless exhaust system

plazmaman 4 inch intake and race box

wastegate and flapper mod and 12 psi actuator

rapid systems cooler and pipework

custom tune by joe

built auto with full manual valve body and 2400rpm convertor

have only just recently got it back on the road due to gearbox and next thing is to take it to eastern creek and see if I can run a 11 sec pas that's my goal

Edited 11/04/14 08:32 AM by andrewkerr

[rednose]

Awesome result man must be a real handfull now.

As for your 11 sec pass, another customer of Joes went 11.2 @ 125 MPH the other night on street tyres with only 311 rwkws so you should sh*t in an 11, maybe even dip into the 10's !!!

[andrewkerr]

I would be happy with a 11 I have never raced a car at the creek have done plenty of street racing when younger but it a different car since getting it back from joe

[MA91CK]

Another beast from joe! May I ask how much it cost to get your auto built? And what's it like compared to stock?

Gotta take my ba up there soon

[andrewkerr]

it cost me 3400 fitted craig built me a box to suit has bigger pump, clutches out of a zf 6 speed billet servos full manual valve body and a few other things which he said were his secret he said will hold 500-600 hp atw and will gave me 12 months 20000ks warranty

very happy with box shifts very hard and tiptronic shifts are quick and feel really good compared to standard box most people I spoke to except rvo transmissions in melb wanted 5k plus to rebuild mine or wanted me to do a conversion which started at about 7k and craig said he could build one but would be full manual which I was hesitant at first but am so glad I got it done

[MA91CK]

That's exactly what I wanted anyway! Sounds like a goer, cause I plan to run around that anyway. Got a GTX may as well use it haha. Stall a good size for around town? How's it drive on the highway?

[Kosij]

Make sure joe talks to your trans builder to ensure shift settings and pressures are setup correctly to suit the mods done to the box or else expect a new box in a month.

Box is only as good as the tune!

Edited 11/04/14 02:09 PM by Kosij

[andrewkerr]

craig told me he had checked to shift points and he was happy with how they are done

[Kosij]

Takes more then shift points to get the box perfect. A tune can blow that box up in a day.

[CCCC]

Good result mate, sould crack a low 11 second pass with that.

Your btr 4 speed sounds interesting, sounds tuff with those mods, I myself have the same gearbox an joe has been tuning my car for the last 5 years, box has over 50k an over 400kw, never had a problem, going to push it over 500kw soon.