old_mate Member 767 Member For: 18y 10m 2d Gender: Male Location: Brisbane Posted 09/04/14 09:28 AM Share Posted 09/04/14 09:28 AM mmmm im waiting to see how it goes with the smaller rear housing.did read on the other forums the suggestion of GTX3582r in the smaller housing as well. Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 2m 4d Gender: Male Location: Mackay QLD Posted 09/04/14 10:13 AM Share Posted 09/04/14 10:13 AM If money grew on tree's id like to try it for comparion. 1 Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 2m 4d Gender: Male Location: Mackay QLD Posted 17/04/14 08:41 AM Share Posted 17/04/14 08:41 AM Finally got the actuator so I could put the GTX on. Spent most of today putting it on. Needed a bit of rearranging the hotside pipeing to match the new angle of the outlet but no real dramas.Spools so fast. Need to readjust the wastegate then I can do some more testing to see if this housing is the way to go, or put the baby GTX back in a Ford sized housing. 1 Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 11d Gender: Male Location: Central Coast Posted 17/04/14 10:57 AM Share Posted 17/04/14 10:57 AM CongratulationsKeep us updated! Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 17/04/14 11:11 AM Share Posted 17/04/14 11:11 AM why is the hot side exit at a different angle? Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 2m 4d Gender: Male Location: Mackay QLD Posted 17/04/14 11:33 AM Share Posted 17/04/14 11:33 AM The way the bolts are spaced around the compressor housing to hold it on are about 20mm off between stock turbo and the GTX.To keep the factory actuator bracket I had to rotate the compressor housing.Look at the bolt circled in Red in comparison to the compressor outlet.GTXFord turbo 1 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 17/04/14 11:39 AM Share Posted 17/04/14 11:39 AM that's what I thought you would say. Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 1d Gender: Male Posted 17/04/14 09:00 PM Share Posted 17/04/14 09:00 PM looks good stazza. good right up to mate. what power u looking at.? Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 2m 4d Gender: Male Location: Mackay QLD Posted 18/04/14 01:45 AM Share Posted 18/04/14 01:45 AM Not the best lighting, too much glare on the dashdaq. Will get another video at night where it will be easier to read. 1 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 18/04/14 05:15 AM Share Posted 18/04/14 05:15 AM (edited) was the same size actuator used as when the car was previously tuned? Edited 18/04/14 05:16 AM by ratter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now