wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 05:49 AM Share Posted 15/02/14 05:49 AM Hey guys. First post ever! Haha. I've been in the 300kw club for years now but I just got my bf late 06 model xr6t back from xtreme ford tuning today after finally getting the turbo waste gate opened up so it could be tuned properly. On a 32 degree day it ran 336.2kw and not quite hitting 720nm at the wheels. Using 95ron petrol as that's all I can get in the bush. With only 13psi boost. The boys told me from xft that's very good numbers using 95. So I'm happy cheers xft 2 Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/ Share on other sites More sharing options...
wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 06:00 AM Author Share Posted 15/02/14 06:00 AM Sorry I should state that it's the zf auto and was in 4th gear for dyno run. Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455441 Share on other sites More sharing options...
knoles Donating Members 390 Member For: 14y 3m 4d Gender: Male Location: Port Hedland Posted 15/02/14 06:55 AM Share Posted 15/02/14 06:55 AM They're very good numbers! What mods does it have? Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455462 Share on other sites More sharing options...
wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 08:28 AM Author Share Posted 15/02/14 08:28 AM Original injectors just drilled out for more flow. F6 snorkel. Better fuel pump, 4 inch dump to twin 3inch manta exhaust,which I fitted myself and it Saved me 900 bucks. Pwr intercooler and new pipes from air box right through to the throttle body, I fitted all that too. And last the bigger flapper and hole resized in turbo with a 12 pound actuator. I did get new valve springs but wasn't really necessary, As my motor is a late 06 model and it was a better set up than the older motors. Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455479 Share on other sites More sharing options...
wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 09:10 AM Author Share Posted 15/02/14 09:10 AM I think my motor was well put together at factory. I've heard that makes quite a difference. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455487 Share on other sites More sharing options...
ratter Member 6,793 Member For: 19y 24d Gender: Male Location: @ my laptop Posted 15/02/14 11:23 AM Share Posted 15/02/14 11:23 AM I saw 303 on Bels BA with injectors, valve springs, fuel pump and actuator on 95, stock cooler, stock crossover, stock cat. stock exhaust etc Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455533 Share on other sites More sharing options...
wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 12:44 PM Author Share Posted 15/02/14 12:44 PM Who did the tuning? That sounds a bit unsafe to me! Like the motor would be detonating whenever you put your foot flat Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455564 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 2m 23d Gender: Male Location: Canning Vale, W.A Posted 15/02/14 01:37 PM Share Posted 15/02/14 01:37 PM He tuned it Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455567 Share on other sites More sharing options...
_Velocity_ Bronze Donating Members 2,768 Member For: 14y 1m 26d Gender: Male Location: Victoria Posted 15/02/14 01:52 PM Share Posted 15/02/14 01:52 PM Wally, ratter is one of the tuners that posts here. He owns a very reputable shop here in Victoria. Suprising numbers for a factory cat though! What psi was that at Mick? Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455573 Share on other sites More sharing options...
wally1983 Member 8 Member For: 13y 1d Posted 15/02/14 02:24 PM Author Share Posted 15/02/14 02:24 PM Well that's amazing! Standard exhaust I would never of thought you could do it. Link to comment https://www.fordxr6turbo.com/forum/topic/87537-336kw-on-95-ron/#findComment-1455580 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now