Jump to content

Recommended Posts

  • Member
  • Member For: 16y 25d
  On 20/02/2014 at 10:15 AM, BiZkets said:

but for how long, how many runs, how long do they last. so what would you think the car would run in 4th. I noticed the car was a au turbo?

It's a c4. Yep single cammer au.

  • Too heavy needs boost
  • Member
  • Member For: 11y 10m 8d
  • Gender: Male
  • Location: Adelaide

what size turbo it kicks in late but very nice power. there is a guy in sa with a ba/bf motor in a au it go's hard. is yours a turbo au motor then.

Edited by BiZkets
  • Donating Members
  • Member For: 12y 9m 1d
  • Gender: Male
  • Location: sydney

so are we talking dyno temps or "REAL" time driving where it counts. I use rapids largest core for my BA and for under $1000 its great.

maybe im just getting old but why do numbers count so bad when the car lays rubber in 3rd gear ?

  • Like 2
  • Donating Members
  • Member For: 13y 10m 3d
  • Gender: Male
  On 20/02/2014 at 9:57 AM, ratter said:

yes you, you offered :)

I will extract the log and chuck it up toomorrow.

Edited by Kosij
  • Donating Members
  • Member For: 15y 4m 27d
  • Gender: Male
  • Location: Christchurch, New Zealand

Just to add other info, I was mucking around with the torque app and watch the temps etc. So car is BF2 running 10psi for 285rwkw, ambient temp was 21 deg C and the intercooler is the small factory cooler.

I went through 4 90 deg corners that cover under 1km in distance was obviously slowing down and accelerating (little bit of feathering for traction then WOT) to around 100km/h (posted limit). Using 2nd and 3rd gear. IAT started at 30 very quickly went to 49 through that area then took about 10km to get back to 30 with driving on cruise at 100k for 3km then 80k for another 3km then 50km for the last 4km.

The factory cooler definitely doesn't do me any favours.

  • Bronze Donating Members
  • Member For: 12y 4m 20d

I don't know how accurate any of this info is as im only going off what the car tells me ( outside air temp) and the air intake temp that the torque pro app is showing.

My car is still running the standard fg turbo 17psi tapering to 12psi towards the top end on E85 . And a stage one process west stepped cooler.

After driving the car for about 40min with a bit of spirited driving in that period I turned on the torque pro app and done 4 back to back runs in 3rd gear wot from 80kmh to 160kmh. ( I could only do it 4 times as the brakes hardly worked after the 3rd run .) The display in the car was showing outside temp was 27c°. Towards the end of the 4 th run while under wot the air intake temp was showing 36c°on the torque pro app.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'