Roley94 Member 114 Member For: 11y 9m 7d Gender: Male Location: Perth Posted 11/01/14 10:40 AM Share Posted 11/01/14 10:40 AM So my zf is on its way out and I want to rebuild it myself, had quite a bit of experience with autos so im pretty confident, Just want to know if there would be any surprises with after market parts like input shafts fitting straight in or if there are any modifications needed. Can pre machined drums that fit extra clutches be bought off the shelf?Or would you say leave it to the pros? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 23d Gender: Male Location: Perth Posted 11/01/14 01:23 PM Share Posted 11/01/14 01:23 PM Amateurs built the ark professionals built the titanic. If you have no time constraints with the car I'm sure it's doable. I have a link to a Jag zf6hp26 rebuild,will dig it up and post Edit: was a range rover trans but still 6hp26http://www.rangerovers.net/forum/6-range-rover-mark-iii-l322/44034-zf-6hp26-teardown.html 2 Link to comment Share on other sites More sharing options...
AdamIan69 Bronze Donating Members 401 Member For: 11y 7m 25d Gender: Male Location: WA Posted 11/01/14 01:40 PM Share Posted 11/01/14 01:40 PM (edited) Depends what kit you put in it, if you go a kit that is 400kw plus then I think some minor machining has to be done. However, if you the the manual and set your bearing preloads right then I think the autos are easy. Edited 11/01/14 01:40 PM by AdamIan69 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 15d Gender: Male Posted 11/01/14 10:21 PM Share Posted 11/01/14 10:21 PM +1 for the rangerover site teardown. Lots of hq pics & good detail. If you had a little spare money, time & the inclination, there are zf boxes that come up on ebay from time to time. Having a replacement might be a good idea. You could also mod the other then sell it. Might make some money back on it? Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 5d Gender: Male Location: Sydney Posted 11/01/14 10:22 PM Share Posted 11/01/14 10:22 PM Through the stage 1 exedy friction and steels kit at it. Its plug and play kit and is rated to 600 rwhp. 1 Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 16y 9d Gender: Male Location: CQ Posted 11/01/14 11:14 PM Share Posted 11/01/14 11:14 PM I know welshy and his cousin built their own box to a 500kw spec and it slipped within months. And they are both pretty cluey lads... But like the others said if you got the time and money go for it. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 18d Gender: Male Location: Canning Vale, W.A Posted 11/01/14 11:28 PM Share Posted 11/01/14 11:28 PM Leave2pros Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 8m 16d Gender: Male Posted 11/01/14 11:56 PM Share Posted 11/01/14 11:56 PM Depends what sort of bloke you are. Some are attention to detail, read up heaps and will get whatever they put their hands on right. Others will have 20 years experience in building boxes and still phuck it up.I'd say if you are the former and a bit of mechanical experience with autos then go for it.If you go ahead please post up what you do. A nice big clean bench where you can lay everything out methodically is a must 2 Link to comment Share on other sites More sharing options...
Roley94 Member 114 Member For: 11y 9m 7d Gender: Male Location: Perth Posted 12/01/14 12:23 AM Author Share Posted 12/01/14 12:23 AM I have seen that range rover site, its pretty good plus I have a 6hp26 rebuild manual here and I can take all the time I need with this car to get it right,Still not sure which route to take as rebuilds arent really that expensive so I could take it to somewhere like Monsta torque and not have to worry about anything going wrong Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 10m 3d Gender: Male Location: Brisbane Posted 12/01/14 01:35 AM Share Posted 12/01/14 01:35 AM I know welshy and his cousin built their own box to a 500kw spec and it slipped within months. And they are both pretty cluey lads... But like the others said if you got the time and money go for it.I think it slipped within a few days however I am pretty sure dan has posted he didnt exactly run the box in before giving it the berries Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now