Jump to content

Turbo Removal


Bubbles1

Recommended Posts

  • Donating Members
  • Member For: 12y 3m 3d
  • Gender: Male

Where are you located mate?

If I remember rightly..

Remove intake to turbo and piping from compressor, cover them up suitably

remove heat shielding, there are some sh*tty bolts to get to from underneath... unless you have a hoist ( suggest spraying turbo manifold mount bolts with CRC or WD40/penetrene as soon as you expose them after removing heat shield)

Unbolt dump pipe at the turbo flange (that's where I dropped it)

remove boost actuator hose from actuator

remove coolant and oil feeds to turbo ( suggest coolant change at this point and oil change)

remove coolant drain and oil drain from turbo ( I took the oil drain off at the block... was just easier I thought)

crack turbo mount flange bolts

remove all mount bolts in turbo and lift out....

something like that.

Edited by Chaos310
  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 21y 8m 4d
  • Gender: Male

Bubbles joins 2 Jan 2013

Bubbles makes first post 2 Jan 2013

Bubbles ask for help on first post 2 Jan 2013

Bubbles last active 2 Jan 2013

Bubbles gets helpful posts within 1 hr of his first post.

Bubbles does not think enough of the help offered to post up a follow up post.

Bubbles has now lost his right for helpful posts.

Edited by turbotrana
  • Like 3
Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 17y 1m 7d
  • Gender: Male
  • Location: Perth

Agree.

I just hit mine with a big hammer.

It normally only takes 2 hits but that can vary with the poundage of the hammer and amount of beers consumed

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'