Jump to content

Ba Xr6T Into The 400 Club


matt036

Recommended Posts

  • Donating Members
  • Member For: 14y 10m 22d
  • Gender: Male

Gday mate, nah just factory 6 speed trans and motor internally is stock as a rock except for valve springs. My engine is a bit of a freak though it seems as when I did my 98 tune it made 360rwkw relativly easy without leaning on it hard at all. But I decided to go e85 for bigger power as its a little more forgiving and touch wood its been good to date. Biggest thing is if your choosing to push a ba motor is to give it every fighting chance so all good parts and going exhaust, intake and cooler and decent fuel system and a quality tuner, my fuel system setup alone which was injectors, surge, pump, reg and braided lines was $2300 all up.

The motor must still be taking it as last night I gave it a 2nd gear roll on and it gripped up for once and then bang!

20140112_134547_zpsslebjaj5.jpg

20140112_104515_zpsa3xtzyjm.jpg

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 10m 22d
  • Gender: Male

It was only runnin 18psi on the 430kw e85 and 19psi on the 98 tune. It is overboosting at the moment to about 20psi now though as I installed a new turbo core and the actuator preload has increased.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'