Chaos310 Donating Members 228 Member For: 12y 3m 14d Gender: Male Posted 31/12/13 03:45 PM Share Posted 31/12/13 03:45 PM Mod it before it goes on the car.Where are you located? may know someone who can help you out with it. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 24d Gender: Male Location: Perth, WA Posted 31/12/13 05:51 PM Share Posted 31/12/13 05:51 PM Both flapper and actuator look stock. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 19d Gender: Male Location: Perth Posted 01/01/14 12:12 AM Share Posted 01/01/14 12:12 AM Could have been worse, you may have got a stock baby FG turbo. 1 Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 4m 10d Gender: Male Location: townsville Posted 01/01/14 01:16 AM Author Share Posted 01/01/14 01:16 AM im in Townsville,...that sucks that its not done, ive had a quick look and the flapper looks stock but the inside sealing surface seems to be thiner but deffantly hasn't been done properly, the guy said he was running different tunes and that it wasn't spiking for himhow much should it cost to get it done properly? 1 Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 4m 10d Gender: Male Location: townsville Posted 01/01/14 01:53 AM Author Share Posted 01/01/14 01:53 AM arrgh don't say that I hope its not a turbo off a fg! Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 01/01/14 02:22 AM Share Posted 01/01/14 02:22 AM a pretty common theme lately is people trying to save themselves money, buy off ebay/Gumtree/forums and getting lied to, end up costing more to get things done correctly, it's getting hard to trust anybody these days 2 Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 4m 10d Gender: Male Location: townsville Posted 01/01/14 02:42 AM Author Share Posted 01/01/14 02:42 AM yea been looking for a bf/ f6 turbo for agers coulnt find a deasont one for under 1100 so when I seen this one and they said it had been mod'ed seemed like a alright dealIf I didn't do this I was gonna pull my stock turbo off and change the front cover and the core to a gtx 3582R and than exchange the rear turbine housing for a mod'd one with a bigger flapper and new actuator but it was gonna cost like $3350 and that's if I removed the turbo and gave it to them for like a week, I cant afford the car to be off the road for that long stuff me round big time + then I need like $1000 for the new fuel pump and retune so was gonna cost like $4500if this was as decriped I would have saved like $2500 but even if the gate mod costs like 1000 its still a lot cheaper than the alternative Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 01/01/14 03:08 AM Share Posted 01/01/14 03:08 AM assuming the core is any good, purchasing second hand could end up with something that may last the life of the car or only last a week 1 Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 4m 10d Gender: Male Location: townsville Posted 19/01/14 11:43 AM Author Share Posted 19/01/14 11:43 AM ive decided that with the help of my bro(slightly mechanically gifted) and after being quoted 1200 to exchange the housing for one that's been moded that im gonna port the gate out properly and replace the flapper myself then buy a new fuel pump and install it myself than bolt the new turbo onjust got a quick Q'swere should I source the parts for the gate being in Townsville and what sizeshould I get a new actuator wanting to run between 16-19psi do I have to machine the surfaces on the turbo to manifold and manifold to headalso whiles ive got the turbo off im going to fix a broken manifold bolt ( very rear bolt into the head) its been broken for about 2 months now so ill be getting the manifold machined to be sureill have to get new manifold bolts new turbo bolts new gaskets for the turbo and manifoldnew oil lines and water lines, fuel pump ( ill talk to the tuner about) and also a new pan and oil to service the gearboxwhich ill be doing my self also,so ive got my work cut out for melucky ive gotta bit of time off soon Link to comment Share on other sites More sharing options...
b-rad Donating Members 257 Member For: 16y 7m 3d Location: townsville Posted 21/01/14 11:41 PM Share Posted 21/01/14 11:41 PM in townsville try MTQ for cheapish turbo related stuff they can even port itfailing that ask your tuner who they recomendwho is the tuner ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now