Jump to content

High Revs On Cold Start, Revs Stay High For 15-20 Seconds Then Slowly


Peter_M

Recommended Posts

  • Member
  • Member For: 13y 8m 30d

Hi All,

My 03 4 spd auto ba xr6t is having an issue on startup. When started (generally on cold start) the revs go high which I assume is natural for a tuned xr6t but then stay high for like 15-20 seconds sometimes more, and if I go to put it into any other gear, the engine light comes on and the car will auto stall.

It has a wog cooler, upgraded valve springs, 42lb deka injectors, rebuilt auto, cold air intake and tuned to 280rwkw.

The following codes have come up on a test:

P0171 - System too lean

P0238 - Lack of HO2s - 11 Switches indicates lean (B1, S1)

P2105 - Throttle actuator control system - forced engine shutdown (assuming when I try to put into gear when revs are so high at startup)

P2110 - Throtle actuator control system - forced limited RPM.

I have also noticed under WOT I feel the boost having gaps, I can even hear the induction gaps from the CAI...

Can anyone give me their 2 cents as I am totally lost at the moment.

Absolutely any suggestions would be greatly appreciated.

Cheers,

Link to comment
Share on other sites

  • New Member
  • Member For: 14y 8m 6d

Hi there, I have had the same problem and after doing some research, I was pointed in the direction of the TPS (Throttle Position Sensor). I changed this and the problem still exists, but not as bad as before. My symptoms include the car running really rough, like it is running on 3 cylinders, and I immediately switch it off and back on again and the problem disappears.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'