sct911 Member 848 Member For: 12y 3m 9d Gender: Male Posted 25/09/14 06:09 AM Share Posted 25/09/14 06:09 AM (edited) I think the bmw ones , it involves machining the box doesn't it ? I'll ask him next time I go in and let you guys know Edited 25/09/14 06:10 AM by sct911 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 30d Gender: Male Posted 25/09/14 06:13 AM Share Posted 25/09/14 06:13 AM I'm assuming the BMW ones are standard ZF clutches.The only reason the box would have been machined is so they can fit more clutches in.So I'd say he has used genuine zf ones.Best to ask. Link to comment Share on other sites More sharing options...
sct911 Member 848 Member For: 12y 3m 9d Gender: Male Posted 25/09/14 06:31 AM Share Posted 25/09/14 06:31 AM Anything wrong with the standard ones ? I hope I have the latest in the box, after all I am spending a good 6.7k Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 9m 11d Gender: Male Location: Central Coast Posted 25/09/14 06:33 AM Author Share Posted 25/09/14 06:33 AM Um 760 landed here in aus But the dollar is all over the shop atm so it'll change quiet quickly Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 6m 4d Gender: Male Posted 25/09/14 06:34 AM Share Posted 25/09/14 06:34 AM (edited) Hamish why are you handing over coin yet you don't know what your getting?I would assume your getting all the fruit. Edited 25/09/14 06:35 AM by Kosij Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 6m 4d Gender: Male Posted 25/09/14 06:41 AM Share Posted 25/09/14 06:41 AM Exedy stg 2 clutches are direct fit, no mods needed to the box.Yet the prices have gone up for rebuilds????I don't understand.Niz Shaft is $2300CMS billet is $1950Exedy stg 2 retail for $900Seal kit and oil filter is roughly $100Oil (LG6) is $250That comes to $3550 (Niz shaft) or $3200 (CMS shaft)Using GW oil reduces the cost by another $150The rest is what the shop charges for R+R plus the rebuild of the box.What's a built box from autotech cost with R$r Link to comment Share on other sites More sharing options...
sct911 Member 848 Member For: 12y 3m 9d Gender: Male Posted 25/09/14 06:41 AM Share Posted 25/09/14 06:41 AM (edited) george which clutches does autotech use ? Edited 25/09/14 06:42 AM by sct911 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 30d Gender: Male Posted 25/09/14 07:09 AM Share Posted 25/09/14 07:09 AM (edited) What's a built box from autotech cost with R$rPretty sure Hamish got quoted 6K for drive in drive out.Box would have consisted ofYV billet shaft.Machined box to accept more steels and frictionsKevlar clutches (don't know what brand these are)Modded convertor to accept the larger shaftGenuine LG6 oilR+Rgeorge which clutches does autotech use ?Whatever the customer wants.I'll be using exedys Edited 25/09/14 07:10 AM by rednose 1 Link to comment Share on other sites More sharing options...
sct911 Member 848 Member For: 12y 3m 9d Gender: Male Posted 25/09/14 09:27 AM Share Posted 25/09/14 09:27 AM (edited) ye mate , Spiro quoted me $6k. No point stressing over what clutches are used, too late for that. All I know is that my stage 2 will be rated to 600rkw, if any problems ever arise, I'm just going to leave the car at CMS doorstep and say "not my problem" :Don a side note:Dear Mr billet input shaft maker,Could you please hurry up and finish the shaft already, the car has been at the workshop for 6 weeks and I am starting to lose my chit now, really stressing me out.Kind regards, Pissed off Customer Edited 25/09/14 09:27 AM by sct911 1 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 30d Gender: Male Posted 25/09/14 09:57 AM Share Posted 25/09/14 09:57 AM An extra $350 could have had you a Niz shaft and the car on the road Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now