Point7nuffsaid Member 2 Member For: 11y 3m 4d Posted 21/11/13 07:13 PM Share Posted 21/11/13 07:13 PM Guys I got a XR6T FG with a GTX, 4" Exhaust, 1000cc injectors, plazzy stage 3 cooler, 4" intake and crap which I have all installed myself, but I have one small problem ...It seems the normal duty cycle for a small injector is a sh*t ton of fuel through the 1000, making it run like hell and virtually undrivable.Is it possible to pull some duty out of the injectors to be able to make this drive to the tuners? Im only going to be babying the throttle and do my best not to make it spool, but the fuel is out of control haha.Whats your thoughts guys?(yes ive thought about a trailer but its a 400km drive) Link to comment Share on other sites More sharing options...
BB. Member 69 Member For: 17y 3m 1d Gender: Male Location: Mildura Posted 21/11/13 07:26 PM Share Posted 21/11/13 07:26 PM Put the stock injectors back in for the trip Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 2d Gender: Male Location: Adelaide Posted 21/11/13 08:04 PM Share Posted 21/11/13 08:04 PM ^^^ this guy ^^^ Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 5m 16d Gender: Male Location: Brisbane Posted 21/11/13 08:05 PM Share Posted 21/11/13 08:05 PM Wow the simple solutions are sometimes the best. Link to comment Share on other sites More sharing options...
Point7nuffsaid Member 2 Member For: 11y 3m 4d Posted 21/11/13 08:12 PM Author Share Posted 21/11/13 08:12 PM That is a brilliant idea ... if I had stock injectors lol. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 2d Gender: Male Location: Adelaide Posted 21/11/13 08:23 PM Share Posted 21/11/13 08:23 PM (edited) Then remove the id 1000's and get some super glue and cover 5/8ths of the tip but wait at least 42 seconds for it to dry then, use a vacuum pump to "suck down" the inlet manifold and suck the injector back inAfter you have done that grab 400ml of air compressor oil and a coat hanger , place them into the far "inverted" section of the boot spaced exactly 233mm apart on a 47.86 degree angle from the no6 injectors reversed 2nd clipStart car but must have throttle at 99% when cranking over followed by pressing the rear demist button x3 times in 0.5 sec gapsOnce car starts hold throttle at WOT or 99% what ever you prefer for exactly 16.7898 seconds , during this time flick the auto selector between P/R/N/D x3 times but dont grip the shifter to tightly !!Once u hear a small "click" sound repeat the steps again after compressor oil and this will scale the injector D/C to 19.567843% Ps get piks and vids Cheers( edit : made a spelling mistake sorry ) Edited 21/11/13 08:25 PM by JETURBO 2 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 9d Gender: Male Location: Perth Posted 21/11/13 11:13 PM Share Posted 21/11/13 11:13 PM Do you have an xcal? Are you familiar with sct's live load software? 1 Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 10m 7d Gender: Male Location: Frankston, 3199 Posted 21/11/13 11:18 PM Share Posted 21/11/13 11:18 PM So car was stock and you did all those changes and now need to get it to a shop to get a tune put in?I'm tipping that the trailer is the best bet here - even just one of those mods (after the intake side of things) would need a tune before the car was driven. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 25d Gender: Male Location: OZ Posted 21/11/13 11:41 PM Share Posted 21/11/13 11:41 PM ^^ what Wiggum said.Get your tuner to send you an email tune to get you to the shop :-) Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 3m 11d Gender: Male Location: Perth, WA Posted 22/11/13 12:45 AM Share Posted 22/11/13 12:45 AM ^^^ TOADS and Wiggum know their chit!Your tuner should be able to help you out with a "mail order" tune to get you to the shop. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now