JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 25d Gender: Male Location: Adelaide Posted 19/11/13 05:45 AM Share Posted 19/11/13 05:45 AM Ok whats the BEST way to clean out a sump full of oil/coolant Ive heard of kerro,diesel and the good old fill,dump,fill,dump x40 timesReally looking forward to a easier, cleaner way Cheers Mc cheers Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 2d Gender: Male Location: Perth Posted 19/11/13 05:50 AM Share Posted 19/11/13 05:50 AM remove sumpplace in dishwasherwashprofit.No real way to clean it out other than removing the sump and cleaning properly.snotmobileliftedtheheadissit? 1 Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 4d Gender: Male Location: SE Melbourne Posted 19/11/13 05:57 AM Share Posted 19/11/13 05:57 AM (edited) Can also try 4 parts 10w oil and 1 part kero and let it idle for 10 mins. Then repeat until the oil coming out is clean. But ^^^^^^^^^ is the BEST way. Edited 19/11/13 06:00 AM by Paulie2256 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 25d Gender: Male Location: Adelaide Posted 19/11/13 05:59 AM Author Share Posted 19/11/13 05:59 AM Nah fluffs drifter did the head gasket, well already done as we got it so just finished changing it now have a billion litres of milky goodness to flush through and want to do it the easier way , if theres such a thing Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 26d Gender: Male Posted 19/11/13 06:07 AM Share Posted 19/11/13 06:07 AM I'd do fill dump fill with cheap Woolies oil a few times. I wouldn't put diesel in there, maybe diesel engine oil as it has more detergent. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 25d Gender: Male Location: Adelaide Posted 19/11/13 06:26 AM Author Share Posted 19/11/13 06:26 AM Yeh supercrap had some 20/50 on sale for $15 ea so I now got 5 bottles in total 4 filters and 2 old engine oil flush additives but I thought there may of been a neat mechanic trick or something Link to comment Share on other sites More sharing options...
BRK Member 361 Member For: 12y 11m 12d Gender: Male Location: Perth Posted 19/11/13 07:41 AM Share Posted 19/11/13 07:41 AM None that are not time consumming or a pull down. Any of the free water floats on top of the oil so stick some of the cheap the oil in and let it settle and then drain.Water + oil = emulsification - so you have to pump that through and out of the system. Keep the bearing load at a minimum so IMO, start , stop, start stop etc - and then drain.Did this on an old windsor that powered Noah's Ark and it came thru okay - but no guarantees.Hope it helps. Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 4d Gender: Male Posted 19/11/13 07:43 AM Share Posted 19/11/13 07:43 AM Maybe also put a few bottles of Oil flush through it also Link to comment Share on other sites More sharing options...
needfordspeed Member 166 Member For: 21y 11m 3d Gender: Male Location: Melbourne Posted 19/11/13 08:57 AM Share Posted 19/11/13 08:57 AM I've owned a few e-series so have been through this a few times, but most of the time it's just a case of draining the sludge, putting some new oil in and driving around for a few hundred kms, then some engine flush before draining that oil and chucking some decent oil in and forget about it. Never had a problem lol. 1 Link to comment Share on other sites More sharing options...
jas98 Member 1,030 Member For: 12y 4m 3d Gender: Male Location: Maryborough Qld Posted 19/11/13 03:10 PM Share Posted 19/11/13 03:10 PM Take engin to fuel station, open oil cap, take sump plug off, proced to fill/flush oil filler hole with diesel.....perfect!I always thorght teh best way was to just flush with oil a few times that's if you dont disassemble the engin and clean it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now