honer Member 18 Member For: 15y 3m 11d Gender: Male Location: Perth Posted 12/11/13 02:03 PM Share Posted 12/11/13 02:03 PM Hi AllI've been scouring the forums for some answers, however unable to find anything definitive as well as it seems most kits are under constant development and old threads may not be relevant anymore. I'm chasing around 550rwhp in my BF Typhoon, I'm hopefully looking for kit that does not require any cutting, if such a kit exists for the power levels I'm chasing. The kits I'm looking at are either the Process West stage 2 (or 3?) or the Plazmaman 800hp kit (Or 1000hp?) Any info would be much appreciated. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 7d Gender: Male Location: Perth Posted 12/11/13 02:56 PM Share Posted 12/11/13 02:56 PM (edited) No cutting with the Nizpro cooler on our BA or BF. Not sure about other brands. Edited 12/11/13 02:57 PM by arronm 2 Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 9m 14d Gender: Male Location: Vic Posted 12/11/13 06:34 PM Share Posted 12/11/13 06:34 PM Go with Nizpro. Link to comment Share on other sites More sharing options...
Redskin New Member 22 Member For: 12y 3m 11d Posted 12/11/13 08:42 PM Share Posted 12/11/13 08:42 PM Plazmaman 1000hp kit requires a bit of modification to Reo support and mabye some of the splash tray if u have one under your bumper Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 1m 4d Gender: Male Location: WA, Perth Posted 25/02/14 01:19 AM Share Posted 25/02/14 01:19 AM Process west Stage 2 or 3 require cutting Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 11d Gender: Male Location: Perth Posted 25/02/14 01:28 AM Share Posted 25/02/14 01:28 AM My Nizzer big big cooler required a small amount of massaging to be applied to the rear of the collision bar.The cooler was close than I was comfortable with considering its rubber mounted and attached by fairly inflexible hoses to a big heavy bit that moves. Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 18y 6d Gender: Male Location: Macksville NSW. Posted 09/08/14 09:28 AM Share Posted 09/08/14 09:28 AM So you'd reckon Nizpro is the way to go?I'm setting my BF XR6T up for some circuit work and my tuner is saying that the F6 cooler I'm running now won't even come close to being good enough.Car is set up for about 340 rwkws and I'd like to get others opinions on what cooler to install without having to cut up the car?All advice appreciated guys.... Link to comment Share on other sites More sharing options...
azzone4 New Member 5 Member For: 10y 1m 10d Posted 14/12/14 11:57 AM Share Posted 14/12/14 11:57 AM Hey mate did you end up finding a cooler that doesnt require any cutting to the support bar etc? Really dont wanna cut my car up either for insurance perpurposes... 1 Link to comment Share on other sites More sharing options...
raised by monkeys Member 90 Member For: 10y 3m 23d Gender: Male Location: Whyalla, SA Posted 15/12/14 01:27 AM Share Posted 15/12/14 01:27 AM Process West have told me their stage 2 doesn't require cutting, but feedback from other suggest otherwise. I myself am not after a large cool, just one that will support up to 400rwkw but as a safety net. Currently at 325rwkw in the F6 and experiencing heat soak.email from nizproHello Shaun If you are still running the standard intake manifold and throttle position then you are after our Nizpro stage one intercooler kit along with the upgraded hot side pipe kit. The intercooler supplied and fitted is $1750 plus the large hot side pipe at $354.00. This intercooler will comfortably do 400 rwkws and can be upgraded to our forward intake manifold if needed latter on. Regards Simon email from PW correct ....stage 2 core is zero cutting Hi mate,Thanks for that. It is tuned at 325rw and I am just applying supporting mods for what is already done. Nothing over the top.I am currently noticing changes in the warmer weather.So for stage 2 instalment no cutting is required?cheersShaunHiShaun My stage 2 intercooler core is plenty for 400rwkw You would need to mate is with my Race Air box for 400kw though. Regards, Kev Link to comment Share on other sites More sharing options...
Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 8m 11d Gender: Male Posted 15/12/14 04:46 AM Share Posted 15/12/14 04:46 AM Those early Nizpro coolers for B series with no cutting aren't much chop at the strip. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now