Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 9m 4d Gender: Male Location: Sydney Posted 03/07/14 01:19 AM Share Posted 03/07/14 01:19 AM I thought these 6466 turbos were good for 600+!!!!Also another dude went 138/9 mph (10.2) with a T3 6466 and 0.84 rear. Hauling!!! ^^^ that dude had 500 rwkws & it was a 1.06 rear so really should have done 140 mph!!Just find it strange that no one's really lent on one yet! Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 2m 29d Gender: Male Posted 03/07/14 01:39 AM Share Posted 03/07/14 01:39 AM My 6235 went 139MPH, bolt one one mine and I'm sure it will see 140+Just because it hasn't been done yet does not mean it can't be done.I'm sure it will happen, not sure that they're good for 600 though. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 18d Gender: Male Location: Canning Vale, W.A Posted 03/07/14 01:46 AM Share Posted 03/07/14 01:46 AM How much boost can it push? Toadsy? Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 9m 4d Gender: Male Location: Sydney Posted 03/07/14 02:08 AM Share Posted 03/07/14 02:08 AM 35 psi at least 1 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 2m 29d Gender: Male Posted 03/07/14 02:19 AM Share Posted 03/07/14 02:19 AM 35 psi at leastWell there you go, mine is at almost 24psi and we went 139.The 6466 is over 2mm bigger so with 35 psi it will go well over 140MPH Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 7d Gender: Male Location: OZ Posted 03/07/14 03:03 AM Share Posted 03/07/14 03:03 AM Veva...the one I'm referring to has a 0.84 not 1.06.35+psi at redline on a 4.0 L. I'm sceptical. Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 9m 4d Gender: Male Location: Sydney Posted 03/07/14 03:23 AM Share Posted 03/07/14 03:23 AM Sure its not a .82 Toad? Simons fge has a .82 on the rear! Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 9m 4d Gender: Male Location: Sydney Posted 03/07/14 03:24 AM Share Posted 03/07/14 03:24 AM Veva...the one I'm referring to has a 0.84 not 1.06.35+psi at redline on a 4.0 L. I'm sceptical.My 1.06 mta900 did 32 pretty easy! And aren't PT's supposed to work best in the upper boost limits? Link to comment Share on other sites More sharing options...
45T-XR Donating Members 417 Member For: 17y 8m 8d Gender: Male Location: Gladstone, Queensland Posted 03/07/14 03:53 AM Share Posted 03/07/14 03:53 AM I've put one of those bolt on 6466's on mine.So far it went a 10.8@131 on 20psi (boost was dropping off, still had twin cats) and a good ol zf limiter bash from 1st-2ndSecond run was stalling it higher and broke the hardy spicer cv on the built shaft.I've cut the cats out today so will retune it shortly and see what it does with 25+psi. My only concern is the headlift that all the tuners talk about so will see what mine does, will lean it off if I have to.If I had workshop doing mine it would be done already, but doing my own after hours takes time lol 1 Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 24d Gender: Male Location: Wollongong Posted 03/07/14 05:10 AM Share Posted 03/07/14 05:10 AM Me personally, would sacrifice power for horny turbo noise. Making power is easy. Horny turbo noise...not so much.this times x 11tyive been having a read up and anti surge covers play a large role in how a turbo sounds. Have a look at the HKST51's, you will notice their fron cover has 2 very thin rings close together and are the same height on the inlet, compared to say my GTX, which has that small odd looking ring inside the inlet. They rekon the manufacturer tuned this to give the HKS its insane whistle. Same goes for the HTA3794, must be a combination of the compressor wheel, front cover shape and distances in between. Id happily run 400 with a mad whine than 500 with no noise ( other than obvious intake suck, no whine ) on the street especially Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now