Danlucas Member 6 Member For: 11y 3m 14d Posted 04/11/13 11:33 AM Share Posted 04/11/13 11:33 AM Hey guys as the tittle states I have a very very sensitive knocking noise in the rear end, comes from the left hand side, will knock over the smallest bumps. So far I've replaced, diff bushes, rotors, calipers, hand brake shoes, link pins, D bushes. The bills are building up for this, and it's doing my head in. My next step is to check the shock on the left hand side, but do worn shocks make a knocking noise? Any other ideas would help me a lot. Thank you. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 2m 25d Gender: Male Location: Probably above atmospheric pressure Posted 04/11/13 03:56 PM Share Posted 04/11/13 03:56 PM Spring seat worn through? Easy to check if it's been lowered as the springs just about fall out when the rear is raised hahaha. Link to comment Share on other sites More sharing options...
Danlucas Member 6 Member For: 11y 3m 14d Posted 04/11/13 09:02 PM Author Share Posted 04/11/13 09:02 PM I didn't even think to check that il have a look, as my car is quite low. Link to comment Share on other sites More sharing options...
Danlucas Member 6 Member For: 11y 3m 14d Posted 05/11/13 06:24 AM Author Share Posted 05/11/13 06:24 AM Spring bushes are fine, shock is fine and not the problem. Any other ideas? Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 6m 26d Gender: Male Location: Maryborough Qld Posted 23/11/13 05:54 AM Share Posted 23/11/13 05:54 AM swivel/rose joint up the top on teh left?mine had clunks etc in the arse and and that was teh cause.jack rear left up, and grab the wheel at top and bottm and try and rock it like push top in and out etc. you will soon know if its that. you will need some force to do it too Link to comment Share on other sites More sharing options...
kylec New Member 15 Member For: 11y 4m 27d Gender: Male Location: Adelaide, SA Posted 23/11/13 09:53 AM Share Posted 23/11/13 09:53 AM Check the hand brake cable behind the rotor also.. if it is slightly loose it tinks/rattles over little bumps Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 3m 30d Posted 26/11/13 11:34 PM Share Posted 26/11/13 11:34 PM Outer control arms bushes. My fg had a bad rear end clunk and changed a heap of things and wasn't until I changed the upper outer control arm bushes and lower outer control arm bushes that fixed it. Cheap to buy the bushes, expensive labour wise Link to comment Share on other sites More sharing options...
Danlucas Member 6 Member For: 11y 3m 14d Posted 26/11/13 11:35 PM Author Share Posted 26/11/13 11:35 PM Hey guys thanks for your answers but was The hand brake cable ratting on the rotor, it lost the little ball bearing thing in it. 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 26d Gender: Male Location: Perth Posted 27/11/13 12:33 AM Share Posted 27/11/13 12:33 AM +10pts for actually following up and reporting back on what you found mate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now