FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 15d Gender: Male Posted 30/10/13 12:21 PM Share Posted 30/10/13 12:21 PM Serviced the ute today & F ME! the oil that was in that thing was f*ckED! completely shot, non service my ass!Anyways, nice clean fresh fluid & a filter later the thing drives beaut. One minor issue, I have a TC light illuminated but no DTC's recorded?? Never had an issue with the light the first 2 times the car was driven but with it showing up, I'm a little wary. First time I noticed the light I turned the car on & off and it fixed it. Second time it was started it stayed off as well. Third time it came on & I drove it home. Thing is, I have this cheapy OBD2 recorder unit from ebay which is fantastic, I'd left it in the port & drove it. I'm wondering if that COULD have been the issue. Other thing is if there is some sort error code I'm not seeing ?To top that off can someone confirm the fill procedure for me? I was under the assumption that you;top it up till it runs out the hole > start > run through gears > top up till dripping again > once hot put in park & shut off > reapply plugHowever, when I did this as soon as the engine was off oil was PISSING out at quite a rate making me think I've over filled so is the procedure the following instead?top it up till it runs out the hole > start > run through gears > once hot put in park & shut off > reapply plugAny answers would be awesome, thanks guys Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 19d Gender: Male Location: @ my laptop Posted 30/10/13 11:15 PM Share Posted 30/10/13 11:15 PM you need to clear the abs codes from the front wheels Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 15d Gender: Male Location: Adelaide Posted 31/10/13 12:15 AM Share Posted 31/10/13 12:15 AM The fill process is temp related to the oil Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 15d Gender: Male Posted 31/10/13 07:09 AM Author Share Posted 31/10/13 07:09 AM Thanks ratterJT - thanks mate, question related more to if the fill is completed (hot) whilst in gear or not. Link to comment Share on other sites More sharing options...
angrydeath911 Member 15 Member For: 11y 1m 15d Gender: Male Location: perth Posted 31/10/13 01:49 PM Share Posted 31/10/13 01:49 PM Just 2 things.First you put the plug back in with the engine running on the 6 speeds. Unlike the old 4 speeds.Secondly you dont check the level when hot. Its ment to be between 32-45 degrees roughly 1 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 15d Gender: Male Posted 01/11/13 10:19 AM Author Share Posted 01/11/13 10:19 AM But is the level checked at those temps whilst in gear or in park? Engine on or off? Link to comment Share on other sites More sharing options...
angrydeath911 Member 15 Member For: 11y 1m 15d Gender: Male Location: perth Posted 01/11/13 12:22 PM Share Posted 01/11/13 12:22 PM in park engine running 1 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 15d Gender: Male Posted 01/11/13 01:43 PM Author Share Posted 01/11/13 01:43 PM Cheers mate. I appreciate it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now