k31th less WHY; more WOT Site Developer 29,054 Member For: 16y 8m 14d Gender: Male Location: Melbourne Posted 02/01/17 03:02 AM Share Posted 02/01/17 03:02 AM Good . They definitely do fit. Trim the threaded rods to length, connect tab crimps to the electrical connections and flatten the tabs so that they don't stick out and then you only need to get a 90deg fitting for the boost pressure, which is "at the bottom" of the rear of the gauge so it actually sits below where the plastic of the gauge holder ends (you might have to remove some dash material from below the surface to make it fit comfortably, though). Then the outer ring on the gauge is a little too big for 52mm. You can either have the ring sit outside the rim of the mount or you can carefully remove the ring and re-glue it in a position where the gauge is sitting perfectly flush and the ring is actually mounted to the cup and the gauge face. Link to comment Share on other sites More sharing options...
useless Member 259 Member For: 20y 6m 21d Gender: Male Posted 02/01/17 04:00 AM Share Posted 02/01/17 04:00 AM (edited) No they don't. The mechanical boost gauge has brass plumbing that extends further than the limited cup space. You cant put the back caps on and you will definitely not get boost host not jammed in there and kinked. Without a grinder it wont go. Electrical boost will though.If you have done it that must be a tight fit. For people that try to do a straight fit it means they must go for another trip looking for angled plumbing which doesnt come in the mail Edited 02/01/17 04:04 AM by useless Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 7m 4d Gender: Not Telling Location: Radioactive wasteland Posted 02/01/17 09:36 AM Share Posted 02/01/17 09:36 AM Ingenuity and modification will make anything fit. Plus duct tape and zip ties fix anything. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,054 Member For: 16y 8m 14d Gender: Male Location: Melbourne Posted 02/01/17 09:58 AM Share Posted 02/01/17 09:58 AM 5 hours ago, useless said: No they don't.... must go for another trip looking for angled plumbing which doesnt come in the mail Yes, you have to purchase more plumbing to do my way outlined... Get the 90 degree fitting from enzed while you're getting the metal t-piece for the boost reference as the plastic one that comes with it sucks. try it for yourself Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 02/01/17 11:40 AM Share Posted 02/01/17 11:40 AM Mine fitted like this Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,054 Member For: 16y 8m 14d Gender: Male Location: Melbourne Posted 02/01/17 11:44 AM Share Posted 02/01/17 11:44 AM clearly magical Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 7m 4d Gender: Not Telling Location: Radioactive wasteland Posted 02/01/17 11:48 AM Share Posted 02/01/17 11:48 AM I call bullsh*t! Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 02/01/17 01:14 PM Share Posted 02/01/17 01:14 PM SS inductions should have kits and pods back in stock early Jan. Spoke to them before Xmas. Wally from top end audio can sort out kits for anyone interested, especially FG MK11. He custom makes them. Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 27d Gender: Male Location: Perth Posted 03/01/17 10:59 PM Share Posted 03/01/17 10:59 PM No they dont.You can't fit a mechanical autometer boost gauge to them without a grinder to cut a big hole in the pod then hack the top of the holderAs chlaxn said 3 years ago... electrical gauges fit fine. I didn't say every 52mm product available from autometer will fit guaranteed or your money back Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 03/01/17 11:40 PM Share Posted 03/01/17 11:40 PM On 1/2/2017 at 7:48 PM, ROB83R said: I call bullsh*t! What........... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now