Wenier Donating Members 1,736 Member For: 15y 4m 13d Gender: Male Location: Christchurch, New Zealand Posted 01/10/13 02:06 AM Share Posted 01/10/13 02:06 AM Hi guys,I have come across some brembo's that I'm going to try and fit, they were running on 370mm discs but I'm going to test them on a 355mm disc as I'm pretty sure the wear area is the same for the pad.One issue I need to sort is the mounting bracket, now if the 355mm disc works I should be able to run the ford type mounting bracket (if I can find one) otherwise I'll get something made to suit.Just wondering if anyone knows the distance between caliper mounting bolts on there ford spec brembo's. Mine came in at about 181mm or 7 2/16 of an inch. See pic:Any help is appreciated, thanks. Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/ Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 8d Gender: Male Location: Perth Posted 01/10/13 02:09 AM Share Posted 01/10/13 02:09 AM Whats the part # on the caliper? Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429361 Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 4m 13d Gender: Male Location: Christchurch, New Zealand Posted 01/10/13 05:36 AM Author Share Posted 01/10/13 05:36 AM Hey Ralph,Here are some of the numbers:8J0615106AG (that's on a sticker)a5440201 (stamped on caliper)It is not a falcon caliper, is a Brembo 4 pot though. Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429412 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 8d Gender: Male Location: Perth Posted 01/10/13 05:42 AM Share Posted 01/10/13 05:42 AM I will measure mine tonight and check the PN. I didn't think the "falcon" calipers where any different? I ran the numbers from mine and they came back and an F40 caliper. (37/32mm pistons IIRC) Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429414 Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 4m 13d Gender: Male Location: Christchurch, New Zealand Posted 01/10/13 06:14 AM Author Share Posted 01/10/13 06:14 AM Thanks bud.There is a faint 12F04 2 stamped on the caliper also that I have now found.It'd be great to get a drawing with dimensions but its being troublesome so far. Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429426 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 8d Gender: Male Location: Perth Posted 01/10/13 10:04 AM Share Posted 01/10/13 10:04 AM 180mm centre to centre for my four potters. Also, any other pics? they look like rear calipers to me mate Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429497 Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 4m 13d Gender: Male Location: Christchurch, New Zealand Posted 01/10/13 10:14 AM Author Share Posted 01/10/13 10:14 AM I dont have any other pics that I can load up at the moment. They are fronts, but as said not from a falcon. They also look identical to some rears from a particular supercar.Thanks for the measurement, mine probably are 180mm so I might have to try find some brackets to make life easier. Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429498 Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 17y 9d Gender: Male Location: north QLD Posted 01/10/13 10:41 AM Share Posted 01/10/13 10:41 AM (edited) Hey champ here is a pic of my Fg GT rspec black 4 pot fronts few little differences from the caliper in your pic to my caliper. Yours may fit no probs at all too. Edited 01/10/13 10:43 AM by CHLAXN Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429509 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 8d Gender: Male Location: Perth Posted 01/10/13 11:44 AM Share Posted 01/10/13 11:44 AM What are they off mate? They appear to have provisions for a hand brake cable and if im not mistaken collected retaining pins? Can you measure piston size? Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429527 Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 4m 13d Gender: Male Location: Christchurch, New Zealand Posted 01/10/13 04:30 PM Author Share Posted 01/10/13 04:30 PM they are very much like CHLAXN pic.Came off an RS3 Audi, that bit is for the electronic pad measuring. Link to comment https://www.fordxr6turbo.com/forum/topic/86406-brembo-caliper-bracket/#findComment-1429557 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now