sixman Donating Members 600 Member For: 20y 5m Gender: Male Location: Hills District, NSW Posted 06/10/16 06:27 AM Share Posted 06/10/16 06:27 AM 17 minutes ago, turboknapp said: Low mount 6boost mate Cool, look forward to seeing how it goes. What a/r housing did you use? Might look into this at a later stage. I briefly asked the bloke at 6boost about making a low mount T3 manifold. In his words "no one else in the world would be stupid enough to put a 0.83 housing on a XR6T" Lol! But the BW 0.83 seems bigger in every dimension compared to the Garrett 1.06. Should have taken some pics of them side by side. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 29d Gender: Male Location: Perth Posted 06/10/16 06:31 AM Share Posted 06/10/16 06:31 AM The turbinee wheels also bigger, so although the housing is physically larger it's quite possible (again depending on the wheel trim) it's tighter than a stock housing. Link to comment Share on other sites More sharing options...
sixman Donating Members 600 Member For: 20y 5m Gender: Male Location: Hills District, NSW Posted 06/10/16 06:48 AM Share Posted 06/10/16 06:48 AM The bw 0.83 turbine housing is designed for their bigger 80mm turbine wheel Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 10m 13d Gender: Male Posted 08/10/16 12:11 AM Share Posted 08/10/16 12:11 AM Nice sixman!! Very jelly!What was the fitment like? I too have been contemplating a low mount T4 manifold, but think it might not be worth the trouble. I think low 400's on pump 98 is about the limit for these cars.Would you mint letting me know who you got it from and the price? PM is fine So whats it drive like, are you impressed with the effort it's taken? Do you think now you should have gone the 9180? Would be keen as mustard to see a dyno graph and some video footage, I believe they sound killer! Link to comment Share on other sites More sharing options...
sixman Donating Members 600 Member For: 20y 5m Gender: Male Location: Hills District, NSW Posted 08/10/16 12:56 AM Share Posted 08/10/16 12:56 AM A few people have asked me where I got the turbo from. It was through a friend and so not available to all. Maybe speak to Jet who can source most things cheap. It is an expensive setup! I did not make any huge saving. I did find a group on ebay based in Florida who worked out a bit cheaper. Are you going low mount? If so get a manifold made where the T4 flange sits further back towards the firewall. Will make the install much easier and you may not need to move the power steer resovoir. Link to comment Share on other sites More sharing options...
sixman Donating Members 600 Member For: 20y 5m Gender: Male Location: Hills District, NSW Posted 08/10/16 12:59 AM Share Posted 08/10/16 12:59 AM Demon, I wish I had gone with this turbo from the beginning. It sounds better than the precision or garrett, and the driveability is something else. Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 10m 13d Gender: Male Posted 09/10/16 02:22 AM Share Posted 09/10/16 02:22 AM Yeah nice. I expected they would be awesome. Could you get a few more pics of the installation? Particularly how close the inlet is to the power steering pump etc. Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 8m 29d Gender: Male Location: perth w.a Posted 09/10/16 10:43 AM Share Posted 09/10/16 10:43 AM Ive got a low mount T4 in my car, will grab some pics when I get home. The GTX and 60mm gate make it a really loud setup, like almost stupid loud haha Link to comment Share on other sites More sharing options...
sixman Donating Members 600 Member For: 20y 5m Gender: Male Location: Hills District, NSW Posted 04/11/16 09:48 PM Share Posted 04/11/16 09:48 PM Heads up. There is a efr8374 replacement - efr8474 in the pipeline. Looks like potentially a perfect street turbo for the barra Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 21d Gender: Male Location: Adelaide Posted 04/11/16 11:05 PM Share Posted 04/11/16 11:05 PM Double heads up the GTX gen2 3576R is good for 750hp/560kw and we all know how conservative Garrett are with their ratings so bring on 500rwkw on a 76 !!! 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now