masda74 To Loud Gold Donating Members 4,112 Member For: 13y 14d Gender: Male Location: WA, Perth Posted 30/11/14 02:29 AM Share Posted 30/11/14 02:29 AM Sounds like I am prety much set then:Pw muffler delete already installed100cpi venom cat already installed with the stock exhaust.Pw stage two intercooler.Pw surge tank old style with a single bosch 044 (stock fuel intake pump)I am assuming that there would be enough fuel supply with this setup?Also still have the oem CAI with a big hole drilled under the air box.I am going to assume for the sevond time that this should be fine as well.I have a manual and my concern now is the clutch and the drive shaft if I get this turbo.Thoughts? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 7d Gender: Male Location: OZ Posted 30/11/14 02:49 AM Share Posted 30/11/14 02:49 AM some are claiming the 6466 spools as quick as the small GTX or BW, this 6266 is close but still a little behind so not sure how the 6466 would respondNice graph as always Mick. What rear housing if you don't mind me asking?Any reason you were in 5th? Exceeded the torque rating of the dyno? Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 7m 3d Gender: Male Location: Gold Coast Posted 30/11/14 05:48 AM Share Posted 30/11/14 05:48 AM Clutch should hold.....just Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 3m 17d Gender: Male Location: Sydney Posted 30/11/14 06:49 AM Share Posted 30/11/14 06:49 AM Got a mate with a fg ute, 320rwkw clutch started slipping. Car only has 15,000km. Doesn't do burnouts either. Just from feeding it on. He just upgraded it. Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 7m 3d Gender: Male Location: Gold Coast Posted 30/11/14 09:19 AM Share Posted 30/11/14 09:19 AM (edited) The muffler delete will need a 4x4" silicon too mate. And I'm assuming you've upgraded the element in the airbox? Edited 30/11/14 09:21 AM by Bomber 1 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 17d Gender: Male Location: @ my laptop Posted 01/12/14 12:11 AM Share Posted 01/12/14 12:11 AM Nice graph as always Mick. What rear housing if you don't mind me asking?Any reason you were in 5th? Exceeded the torque rating of the dyno?Thanks mate, I believe it was the .82 rear housing, (owner did the mechanical work himself)This car exceeded the torque limit of our dyno, so we ran it in 5th but at a ramp rate to match a 4th gear run. Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 14d Gender: Male Location: WA, Perth Posted 01/12/14 02:28 AM Share Posted 01/12/14 02:28 AM Yeah, I got a K&N filter in there. I got 310 killer wasps and I have not had issues with slipping yet.I did have issues with 3rd before the tune where it would slip and had bad smells coming from the gearbox.It definitely smelled like clutch was slipping big time.Not sure what happened, but since the tune, I have not had issues since. Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 7m 3d Gender: Male Location: Gold Coast Posted 01/12/14 10:00 AM Share Posted 01/12/14 10:00 AM What's the worst that can happen 2 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 14d Gender: Male Location: WA, Perth Posted 01/12/14 12:07 PM Share Posted 01/12/14 12:07 PM A new NPC kit for 3200 clams............Coinage I do not have right now. CHRISTMAS is just around the corner. Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 9m 1d Gender: Male Location: Perth Posted 01/12/14 02:16 PM Share Posted 01/12/14 02:16 PM Man fùck Christmas. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now