XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 29d Gender: Male Location: Perth, WA Posted 19/09/13 12:42 PM Share Posted 19/09/13 12:42 PM So many ways to skin a catIve just gone for the upgraded billet wheel,, port and flapper obviously..Atomic cams and crow springs.The thing comes on pretty much like the baby turbo did.. 480rwhp.... with very conservative timing..This thing on E70 or 85 would be absolutely insaneUpgrade front wheel on factory 3576r?Any more info on the upgrade mate? I asked about this in the past but did not get any info.Thanks Link to comment Share on other sites More sharing options...
AdamIan69 Bronze Donating Members 401 Member For: 11y 7m 29d Gender: Male Location: WA Posted 19/09/13 01:28 PM Share Posted 19/09/13 01:28 PM (edited) Have you driven a car with a GTX3576?Ultimate turbo for a street driven car IMHO (especially if the car is manual) good for 370+rwkw on E85 and will smoke just about any other turbo spool wise at any speed considered legal on a public road I have never driven one, the only time I see a bit of lag is from a standing start and not using the stall converter. Any other time I will drop it back a cog.However you need to consider driving style when choosing a turbo. So I do know the 82r isn't everyone's cup of tea. Edited 19/09/13 01:34 PM by AdamIan69 Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 29d Gender: Male Posted 19/09/13 08:14 PM Share Posted 19/09/13 08:14 PM Gtx3576rwith 370rwks on E85 would be a weapon ... Off the lights it will be a rocketship..I would prefer that than 420rwks 35/40 2 Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 4m 2d Posted 19/09/13 10:27 PM Share Posted 19/09/13 10:27 PM Upgrade front wheel on factory 3576r?Any more info on the upgrade mate? I asked about this in the past but did not get any info.ThanksYep upgraded wheel and machined front housing ..Still early days..we cut the tuning short due to a VCT issue. But seat of the pants it pulls like the baby turbo.. and keeps going. I saw it as a cheaper alternative the the gtx76r... just for a trial I guess. For $600 odd I really had nothing to lose..It would be hard to compare to another as Ive got the cams. But all I can say it is vey aggressive. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 13d Gender: Male Location: OZ Posted 19/09/13 10:43 PM Share Posted 19/09/13 10:43 PM Torque always follows the boost curve closely (as seen above), and yeah I agree....add timing and you will raise torque in most cases. That last graph shows a 50kw increase at the top end and gains everywhere else. Had a larger turbo been chosen the gains down low from using e85 would be lost and if your target boost is still say only 19psi (required for 450 on e85) then the extra airflow from a larger framed turbo isn't really needed. It's a different story if you want to go all out though OR the larger frame turbo is pushing a lot more air at the same pressure ratio!!!Bomber I went from 350 to 400 on the same boost (15psi) going to e85. If the GTX3576 can hold ~17psi at the top end, you might just make it!! 1 Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 26d Gender: Male Location: Sydney Posted 19/09/13 11:01 PM Share Posted 19/09/13 11:01 PM I am also considering a new GTX3576R core.Keep my original 0.50 housing and get it machined to fit the slightly larger compressor wheel.Might also need an external Waste Gate to keep boost fairly even across the range. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 29d Gender: Male Location: Perth, WA Posted 20/09/13 12:21 AM Share Posted 20/09/13 12:21 AM Yep upgraded wheel and machined front housing ..Still early days..we cut the tuning short due to a VCT issue. But seat of the pants it pulls like the baby turbo.. and keeps going. I saw it as a cheaper alternative the the gtx76r... just for a trial I guess. For $600 odd I really had nothing to lose..It would be hard to compare to another as Ive got the cams. But all I can say it is vey aggressive.Thanks for the info jimmixr.Do you have any more info on the upgraded front wheel? Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 4m 2d Posted 20/09/13 12:44 AM Share Posted 20/09/13 12:44 AM All I know its a billet 11 blade 61.4mm wheel (same size as the GT3582)But beware.. not all billet wheels are created equal....Pretty common conversion from what Ive seen.As I said.. definitely a cheaper option than the GTX... Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 28d Gender: Male Location: Perth Posted 20/09/13 12:49 AM Share Posted 20/09/13 12:49 AM Got any datalogs of it spooling in 4th Jimmi? Keen to see how it compares the GTX wheels Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 4m 2d Posted 20/09/13 01:32 AM Share Posted 20/09/13 01:32 AM Seat of the bum ralph !! lol...That's all I can offer you mate.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now