Wenier Donating Members 1,736 Member For: 15y 2d Gender: Male Location: Christchurch, New Zealand Posted 02/09/13 01:34 AM Share Posted 02/09/13 01:34 AM Hey guys,Just wondering if someone can give me an answer to this issue.When I try to read the DTC's in my ute I plug the xcal3 in as per normal and follow the on screen instructions. It gets to the turn key to ON but don't start so do that then about 30sec later I get this code.P1000 - obd systems readiness test not complete.So it throws that code and won't give any others.Anyone know why it does this?Thanks. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 28d Gender: Male Location: Perth Posted 02/09/13 01:38 AM Share Posted 02/09/13 01:38 AM Go for a drive. 1 Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 2d Gender: Male Location: Christchurch, New Zealand Posted 02/09/13 05:33 AM Author Share Posted 02/09/13 05:33 AM If it were that simple I wouldn't have asked.I can go for a drive or multiple drives, erase codes everything but it always comes up with that. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 7m 24d Gender: Male Location: @ my laptop Posted 02/09/13 05:35 AM Share Posted 02/09/13 05:35 AM it will come up everytime codes are cleared or ecu is flashed, it will stay until the car has completed a drive cycle test Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m 27d Gender: Male Location: Probably above atmospheric pressure Posted 02/09/13 12:37 PM Share Posted 02/09/13 12:37 PM Farking computers, so many smarts that they are just dumb half the time. Or maybe too smart for the average joe to wrangle. Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 2d Gender: Male Location: Christchurch, New Zealand Posted 03/09/13 05:42 AM Author Share Posted 03/09/13 05:42 AM it will come up everytime codes are cleared or ecu is flashed, it will stay until the car has completed a drive cycle testWhat does the car class as a drive cycle? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 20d Gender: Male Location: Adelaide Posted 03/09/13 05:43 AM Share Posted 03/09/13 05:43 AM Go for a 20min hoot Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 7m 24d Gender: Male Location: @ my laptop Posted 03/09/13 07:06 AM Share Posted 03/09/13 07:06 AM What does the car class as a drive cycle?no idea what the conditions are before it does it's diagnostic trip Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 2d Gender: Male Location: Christchurch, New Zealand Posted 03/09/13 07:34 AM Author Share Posted 03/09/13 07:34 AM No worries, will have to wait and see if it goes away one day. I hadn't done any DTC clearing or re-flashing of tunes for months and had done some long trips and it came up with that when I thought I should have a look and see if anything was logged. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now