fgxr6t89 Member 16 Member For: 12y 3m 14d Gender: Male Location: Melbourne, South East. Posted 30/08/13 01:46 PM Share Posted 30/08/13 01:46 PM Hi,Hoping someone can shed some more light or point me in the right direction here.I have a FG XR6 Turbo auto.My car made 312rwkw with the following mod list:4" dump - 3.5" turbo back exhaustCold air intake (pod enclosure)Larger intercoolerRebuilt turbo12 PSI Actuatorid1000 injectorsWalbro 400 LPH in-tank fuel pumpIntercooler piping w/muffler deleteValve springsSCT XCAL 3 tuned on 98 The tuner said the car was pinging up high so he had to lower the boost and couldn't add as much timing.He even tried adding octane booster to see if it would help.I would have thought with the mods mentioned I would expect to see 330 - 350rwkw.Does anyone have any suggestions or thoughts?Cheers. Link to comment Share on other sites More sharing options...
matsfgxr6turbo Member 388 Member For: 14y 10m 10d Posted 30/08/13 02:31 PM Share Posted 30/08/13 02:31 PM what brand of intercooler are you using? Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 2d Gender: Male Posted 30/08/13 07:42 PM Share Posted 30/08/13 07:42 PM who's the tuner mate.? Link to comment Share on other sites More sharing options...
stevanford Member 268 Member For: 12y 10m 15d Posted 30/08/13 10:01 PM Share Posted 30/08/13 10:01 PM Power sounds about right for a standard turbo fg xr6 turbo though you mention a "rebuilt turbo". Rebuilt to what specification exactly ? Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 19y 11m 9d Gender: Male Location: In my house Posted 30/08/13 10:10 PM Share Posted 30/08/13 10:10 PM Not bad power.Each car can be different as I found with one of my cars and dyno,s can be as well..Put up a pick of your dyno sheet. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 27d Posted 30/08/13 11:00 PM Share Posted 30/08/13 11:00 PM If you've just rebuilt the stock turbo then that sounds about right mate. They say the small turbo can go to 330rwkw but that's depending on the dyno. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 18d Gender: Male Location: Canning Vale, W.A Posted 30/08/13 11:05 PM Share Posted 30/08/13 11:05 PM Ported housing bigger flapper? Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 10m 3d Gender: Male Location: Brisbane Posted 30/08/13 11:23 PM Share Posted 30/08/13 11:23 PM Mine went 300 exact same mods except valve springs. Another FG went 350 same dyno but the tuner was really leaning on it. Anywhere from 310 to 335 is about right depending on the dyno as has been said. Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 1m 12d Gender: Male Location: Perth SOR Posted 30/08/13 11:30 PM Share Posted 30/08/13 11:30 PM (edited) When my ute was tuned to 300 atw, the tuner also had issues with early detonation, so much so that he asked several times whether I was running bp98 or not.Then when I got the GTX tune, no detonation issues at all, but by that time I was just running any old 98.Who knows whether it was fuel related or not, but it always bugged me that I'd always bought the (supposed) good stuff.You'd expect that with a full exhaust, you'd be able to max out that stock turbo, but what that max out number is would depend on a few factors. But I wouldn't think you'd get to 350 unless its an F6 turbo or you're using E85.At 312 though, I bet it's still a beast ! Edited 30/08/13 11:33 PM by Boganspeed Link to comment Share on other sites More sharing options...
AdamIan69 Bronze Donating Members 401 Member For: 11y 7m 25d Gender: Male Location: WA Posted 30/08/13 11:37 PM Share Posted 30/08/13 11:37 PM Power sounds about right for a standard turbo fg xr6 turbo though you mention a "rebuilt turbo". Rebuilt to what specification exactly ?what brand of intercooler are you using?Ported housing bigger flapper?What they said... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now