Jump to content

Recommended Posts

  • Inactive Members
  • Member For: 11y 8m 7d

hi guys first time poster long time reader.

I have just dropped my rear cradle on my g6et to do bushes and upgrade to a lsd. now all that was pretty straight forward but I'm stuck on the irs axles.

can somebody tell me how to remove the axles from the diff? I want to remove the diff from the cradle so I can take it to the shop.

any help would be appreciated.

cheers.

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 6m 25d
  • Gender: Male
  • Location: Perth

Use a small pry bar or level and lever between the CV housing and Diff housing.

Lay the prybar length way between the two housing so you dont pry againt the seal.

There is a small spring clip on the end of the stub shaft once it pops clear fromt he groove in the spider gears in the diff the shaft will slide out.

  • Member
  • Member For: 12y 8m 25d
  • Gender: Male
  • Location: Maryborough Qld

what happenes when the part were the seal runs has grouves in it from the seal? if that makes sence lol....can the shafts be reused?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'