AndreK New Member 9 Member For: 11y 4m 27d Gender: Male Location: Perth, WA Posted 16/08/13 02:27 AM Share Posted 16/08/13 02:27 AM Gidday guys, new to forum. Keen on gathering advice and insight on FPVs.This is my 2011 Black F6 ute as attached.I'm wanting some advice on what is needed and advised to get to lower my ute. I've heard about lowering blocks, springs for front and resetting the leafs for the rear. I'm wanting some serious 500+ rwhp mods in the future so what products would be best suited for the longevity of the running gear; not so much driving comfort.Cheers Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 7d Gender: Male Location: Perth SOR Posted 17/08/13 02:04 AM Share Posted 17/08/13 02:04 AM Another WA guy !I had 2" blocks in my ute and they were horrible so I went resets and the blocks are now sitting in my garage gathering dust.If you want more than 2" at the back, then maybe 1" blocks and a reset.If you lower the front much, be prepared for a camber kit unless you can afford new front tyres every year.I highly recommend WA Suspensions in Ozzie park. They will not bullsh*t you and give great service.As for horsepower, have a look in the +300 and +400 sections to see what others are doing.Also look in the WA Section for monthly cruises so we can meet you and SteveR can show you his mad precision parking skills. Link to comment Share on other sites More sharing options...
southside Member Member 868 Member For: 15y 10m 9d Gender: Male Location: Radelaide.. Real Posted 17/08/13 02:18 AM Share Posted 17/08/13 02:18 AM Lowering blocks are a pain and sacrifice handling. Get a reset leaf springs and coil overs for the front. I'd recommend Shockworks coil over system, as they have been designed for the FG cars. As for power and control, it depends what your goals are? When I was running the ute daily with a 460rwkw tune it handle fine with standard suspension. A little boaty in the hills but still nothing as bad as people claim. I've been in a ute where a mates just slammed it with kings and blocks.. and my god, it's terrible! couldn't stand how awful it handled. But then again, it's up to the individual! Link to comment Share on other sites More sharing options...
Souter Member 2 Member For: 11y 10m 26d Gender: Male Location: Perth Posted 18/02/14 05:55 PM Share Posted 18/02/14 05:55 PM MORE WA GUYS YEWWW get on club FG boys on FB and add me Ash Souter we are always going on cruises and stuff 2 Link to comment Share on other sites More sharing options...
vixenf6 Member 84 Member For: 11y 1m 30d Gender: Male Posted 20/02/14 10:13 PM Share Posted 20/02/14 10:13 PM (edited) Herrod rear leaf springs (Reversed eye to reduce ride height without reducing ride quality) it's a king spring set to their specCoilover Front and adjustable body rear shock ...Shockworks have a good coilover setup for $1700 rear herrod leaf is around $1200 from memoryThis setup will yield an almost sedan like handling.I have Pedders with the Herrod rear leaf atm and not happy at all with the pedders coilovers and I am going down the Shockworks route, with this setup I get no axle tramp what so ever but just want better compliance from the shocks themselves and that's why I am going with ShockworksBrett who has designed these Shockworks coilovers claims that he has done all the R&D for the RSPEC GT Ute and Sedan and has developed many of Fords dampening and shock setups from the BF through to the FG.There is more info on Shockworks on the AFF forums.Hope this help mate. Edited 20/02/14 10:16 PM by vixenf6 Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 21d Gender: Male Location: Wollongong Posted 21/02/14 01:11 AM Share Posted 21/02/14 01:11 AM Herrod rear leaf springs (Reversed eye to reduce ride height without reducing ride quality) it's a king spring set to their specCoilover Front and adjustable body rear shock ...Shockworks have a good coilover setup for $1700 rear herrod leaf is around $1200 from memoryThis setup will yield an almost sedan like handling.I have Pedders with the Herrod rear leaf atm and not happy at all with the pedders coilovers and I am going down the Shockworks route, with this setup I get no axle tramp what so ever but just want better compliance from the shocks themselves and that's why I am going with ShockworksBrett who has designed these Shockworks coilovers claims that he has done all the R&D for the RSPEC GT Ute and Sedan and has developed many of Fords dampening and shock setups from the BF through to the FG.There is more info on Shockworks on the AFF forums.Hope this help mate.so your saying you have coilovers with your leaves?Basically theres three ways you can go that arent dodgy.1. economy/average handling: (.5-1k)King springs front, reset rears. sligghhtttlllyyy better handling, nothing special at all though.2. intermediate/better handling: (2-2.5k)kings/pedders springs front, kings/herrod leaves rear, replace bushes and shocks with pedders/koni/belstein. much better than stock, still a leaf sprung ute though.3. advanced/great handling: (5-6k+)Adjustable coilovers front, (XYZ,TIEN ETC) new bushes. 4 link rear with adjustable coilovers and all bushes re done. 4 link is very pricey (4k) but will scare even evos and the like around a track. get big brakes and you will have a very unassuming car that will embarrass most "track" cars with the right tryes, camber etc. 1 Link to comment Share on other sites More sharing options...
AndreK New Member 9 Member For: 11y 4m 27d Gender: Male Location: Perth, WA Posted 16/03/14 12:36 PM Author Share Posted 16/03/14 12:36 PM Thanks for the info guys!Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now