XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 5m 11d Gender: Male Location: Perth, WA Posted 27/08/13 04:54 AM Share Posted 27/08/13 04:54 AM When is this getting tuned Aaron? Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 11m 5d Gender: Male Location: Canning Vale, W.A Posted 27/08/13 05:17 AM Author Share Posted 27/08/13 05:17 AM Took it to Monstatorque yesterday, went there after work this morning (nightshift ftw) to get the bros car and they are just finishing up fitting the valve springs and surge tank/injectors. Will go on the dyno tomorrow or even this evening. The BF made 322rwkw @ 14psi having been down as low as 290 when it came in with it's surging amd leaks, he asked if we wanted it pushed harder but my brother isn't chasing numbers so hes just happy to have it running well again.. shame we couldn't test it with the weather the way it is! Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 11m 13d Gender: Male Location: Vic Posted 27/08/13 06:33 AM Share Posted 27/08/13 06:33 AM What's the multitool and extra chit cost You so far? Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 11m 5d Gender: Male Location: Canning Vale, W.A Posted 27/08/13 06:45 AM Author Share Posted 27/08/13 06:45 AM Multitool cost me 79$ and I had to by a toolset (90$) as I had nothing... Could have used the old mans tools but I need to start stocking my shed anyway. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 11m 5d Gender: Male Location: Canning Vale, W.A Posted 28/08/13 05:26 AM Author Share Posted 28/08/13 05:26 AM Made 401rwkw first run 399.4rwkw second run BUT I'm gonna have to go in next week so they can adjust the actuator as there's too much pre tension on there that its not opening the wastegate enough for them to safely control the boost. The things ya do.. So.. not yet officially a member. Have to run around on a 4k rev limiter until next Wednesday. Fun times! 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 9d Gender: Male Location: Probably above atmospheric pressure Posted 28/08/13 05:55 AM Share Posted 28/08/13 05:55 AM Decent result! Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 3m 3d Gender: Male Location: WA, Perth Posted 28/08/13 05:58 AM Share Posted 28/08/13 05:58 AM Sweeet results. I will be making my way down to MT this arvo and I will have a look. Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 4m 1d Gender: Male Location: Perth SOR Posted 29/08/13 11:51 AM Share Posted 29/08/13 11:51 AM Kick arse Aaron!You'll be stoked when its all done and finished and you can just enjoy the car.I'll look forward to seeing it on a cruise real soon. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 11m 5d Gender: Male Location: Canning Vale, W.A Posted 18/02/14 11:55 PM Author Share Posted 18/02/14 11:55 PM Thought I'd update and leave this here just incase not everyone saw the PTE vs GTX thread.New mods were:Process West Twin 460 surge tank setup with a fuel regulator.PTE 6235 turbocharger.98 and E85 tune respectively.Happy with the results and I dont think I need anymore power.. lol.Future mods will be for reliability obviously, sometime later this year the tailshaft and box will be replaced so I can take her down the strip and some better brakes and tyres cause losing it in manual 3rd on the freeway aint ideal!. 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now