AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 21d Gender: Male Location: Canning Vale, W.A Posted 24/08/13 10:44 PM Author Share Posted 24/08/13 10:44 PM Goes in tomorrow! Really excited. Would love to make 400 on pump but if not the option for E85 is available later down the track if need be.Forgot to put up a pic with all the pipes showing. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418580 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 5m 30d Posted 24/08/13 11:01 PM Share Posted 24/08/13 11:01 PM Did you have to cut any of the front metal support? I had to and I wonder if its because I didn't redrill the radiator mounts far enough back.. But by time I realised I could do anything about itI didn't even both with the cooler mounts provided as they didn't line up properly at all and were flimsy as chit! Just made new top mounts using 8mm angle lineI also went around the place with a silicone gun and put silicone anywhere where it could rub such as face of the intercooler on metal support, cold side pipe near battery bracket etc. Just so it doesn't rub through the metal over time, depending on how close things are (I have like 1mm clearance everywhere) I would try do it Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418587 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 21d Gender: Male Location: Canning Vale, W.A Posted 24/08/13 11:20 PM Author Share Posted 24/08/13 11:20 PM Nah I didnt have to touch the metal support bar in regards to fitting up the intercooler mate. But I have barely any clearance between the radiator fan and the belts. Had to grind some of it away where the cooler connects to the hotside piping as there was no gap at all to fit the silicon hose and clip. I agree with you on the mounts. . Being able to easily bend them around I really fail to see how supportive they are. They're like taffy lol. I'll have to do that near the battery bracket as during WOT thatll no doubt rub and shift around. I made my holes in the body huge.. it hurt me to do so. Had to modify my tray to as the cooler mounts rubbed on it.Arronm I tried them first, he's usually pretty good for things like this but didn't have the size I needed unfortunately. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418592 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 6m 27d Gender: Male Location: Perth, WA Posted 25/08/13 12:46 AM Share Posted 25/08/13 12:46 AM Had a quick look and don't have any 2.5" 90deg joiners. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418605 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 21d Gender: Male Location: Canning Vale, W.A Posted 25/08/13 01:15 AM Author Share Posted 25/08/13 01:15 AM Ahh damn that stinks.. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418610 Share on other sites More sharing options...
mummba Member 525 Member For: 15y 1m 12d Gender: Male Location: perth Posted 25/08/13 01:23 AM Share Posted 25/08/13 01:23 AM looking good there mate, cant wait to see it out on some cruises Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418612 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 21d Gender: Male Location: Canning Vale, W.A Posted 25/08/13 03:58 AM Author Share Posted 25/08/13 03:58 AM Weather provided I'm 100% in on the 6/9th cruise!Driving to O'connor now as the Autopro there has the joiner I'm after! Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1418640 Share on other sites More sharing options...
mrdatsun21 Donating Members 17 Member For: 14y 9m 15d Gender: Male Location: Perth Posted 26/08/13 11:41 AM Share Posted 26/08/13 11:41 AM I've got an 08 XR6T and was wondering do you have to remove the mesh insert in the bottom part of the spoiler to get the cooler in? That would hide the cooler a bit better I'd think. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1419074 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 21d Gender: Male Location: Canning Vale, W.A Posted 26/08/13 12:08 PM Author Share Posted 26/08/13 12:08 PM Nah you don't.. I removed mine, thought I'd get extra street cred. Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1419085 Share on other sites More sharing options...
SecaBoy Donating Members 203 Member For: 16y 2m 16d Posted 27/08/13 03:30 AM Share Posted 27/08/13 03:30 AM On 24/08/2013 at 1:31 AM, AaronXR said: That multitool came in super handy, But cutting into the girl wasn't thrilling to say the least. GET THIS MULTITOOL (as Secaboy would say)HAHAHAHAHAHAHAHAHAHAHAH FUQN LOL!!! :lol:was I right or was I right? I love the multitool. such an awesome product!!! haha Link to comment https://www.fordxr6turbo.com/forum/topic/85974-aaronxr-v20/page/8/#findComment-1419201 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now